zayne2427
There's only one way to find out
I just traded for this buggy a few weeks ago and found out ill be starting a new job in the next 2 weeks. Going to be on the road a good bit and wont have much time for the buggy and going to have to buy a commuter car. I've been wanting a 500 hp buggy for a while but right now Its either the buggy or my truck.
I don't owe anytjing on the buggy and it isnt eatinf anything. I dont have to sale but will to get another car
2 seat full tube buggy
-Fully built 6.0 LQ4 with 4.8 heads ported, 600 lift cam roller rocker arms Texas speed push rods high lift springs edelbrock intake aluminum neck with a 90mm throttlebody and tune pushine between 500-550 horsepower
-built th350 with all kevlar cluthes 2800 stall
-205 twin stick with 33 spline outputs front and rear
-14 bolt rear with btf truss 4 link on air shocks
-60 front 35 spline chtomolly outters with yukon drive flanges trussed 3 link air shocks and air bumps
Lincoln locked front and rear
All 4 Fox air shocks are brand new
-Hydraulin steering with single ended ram
-corbeau seats
-radiator behind seats
-full aluminum skids and boat sides
-98% 39.5 pitbull rockers on H1 recentered beadlocks with cut down mag inserts and rock rings
Definitely wheelable like it sits but needs a few lil things finished up on it to be 100% complete
- gauges need wired(i have a complete box of autometer gauges for it)
-headlights wired(2 kc lights inclukded)
- winch wired ( brand new smittybuilt winch with synthetic rope included at askin price)
Chassis was built a few years back and then had been bought and drive train swapped. The buggy was just finished by johnathon lay with new motor trans tcase axles and suspension
Needs to be ridden and will have some more kinks to be worked out im sure
Price is $19,100 or best offer
will consider all partial trades. Not looking for anything particular. Will consider anything that comes with cash.
rzr, streetable jeep, suv, motorcycles, muscle cars, guns etc...etc..
Located in cullman alabama
256..347..2508..
Call or text anytime
I don't owe anytjing on the buggy and it isnt eatinf anything. I dont have to sale but will to get another car
2 seat full tube buggy
-Fully built 6.0 LQ4 with 4.8 heads ported, 600 lift cam roller rocker arms Texas speed push rods high lift springs edelbrock intake aluminum neck with a 90mm throttlebody and tune pushine between 500-550 horsepower
-built th350 with all kevlar cluthes 2800 stall
-205 twin stick with 33 spline outputs front and rear
-14 bolt rear with btf truss 4 link on air shocks
-60 front 35 spline chtomolly outters with yukon drive flanges trussed 3 link air shocks and air bumps
Lincoln locked front and rear
All 4 Fox air shocks are brand new
-Hydraulin steering with single ended ram
-corbeau seats
-radiator behind seats
-full aluminum skids and boat sides
-98% 39.5 pitbull rockers on H1 recentered beadlocks with cut down mag inserts and rock rings
Definitely wheelable like it sits but needs a few lil things finished up on it to be 100% complete
- gauges need wired(i have a complete box of autometer gauges for it)
-headlights wired(2 kc lights inclukded)
- winch wired ( brand new smittybuilt winch with synthetic rope included at askin price)
Chassis was built a few years back and then had been bought and drive train swapped. The buggy was just finished by johnathon lay with new motor trans tcase axles and suspension
Needs to be ridden and will have some more kinks to be worked out im sure
Price is $19,100 or best offer
will consider all partial trades. Not looking for anything particular. Will consider anything that comes with cash.
rzr, streetable jeep, suv, motorcycles, muscle cars, guns etc...etc..
Located in cullman alabama
256..347..2508..
Call or text anytime
![IMG_8652[1].JPG](https://cdn.hardlinecrawlers.com/xfmg/thumbnail/12/12575-d7c7976a331679065e8a59d6e9f88b72.jpg?1625929715)
![IMG_0876[1].jpg](https://cdn.hardlinecrawlers.com/xfmg/thumbnail/22/22580-c85da9e3b0ee63a02435d1d209419f8b.jpg?1652262314)