Beefcake
Well-Known Member
Please read ad completely. Located in Burlington KY just south of CIncinnati, OH
Price as it sits $14,000.00 OBO
Without wheels and tires $10,000 OBO
Chassis with motor trans transfer case wiring plumbing radiator fuel cell gauges and dash shifter drive shafts all steering $7,000 OBO
Wheel base is 116'' belly ~21'' overall heigh is around 77" < might need to check that.
Please don't waste my time but if seriously interested can provide more pictures and even a few videos over text.
Engine
-1995 4.3 vortec ~115k miles
Howell efi harness ecm and tuning
Pace setter headers wrapped with DEI exhaust wrap. Wired professionally with relays very weather resistant fuses and loom.
Trans
-TH350 just built last summer, new gears and clutches, full rebuild kit, pump, torque converter, full RMVB.
- Artcarr sidewinder gated shifter open from R-N-1
Transfer case
NP205 twin stick kit not sure on brand CV flanges with Toyota pattern.
Suspension
4 link front and rear
14" ORI stx struts in the front
16" ORI stx struts in the rear
1.5" x .250 DOM upper links
2" 7075 Aluminum lower links
Chromo heims from Midwest 7/8" lower 3/4" uppers
Axles
Chevy Dana 60 front Artec industries truss
Yukon 5.38 gears and spool professionally setup. TMR diffguard. Solid industries knuckles. Solid industries high steer arms with double sheer kit from Artec Industries. 1.5" .250 DOM tie rod. PSC 8" SE ram. 3/4 ton disc brake conversion. Stainless AN brake lines. CV flange for Toyota drive shaft. Yukon chromo shafts with super joints. Sunfire Offroad drive flange kit.
Rear 14 Bolt full float Artec industries truss with pinion guard. USA standard or Yukon 5.38 machines down gears. TMR diff guard and shave kit. 3/4 ton Disc brake conversion. CV flange for Toyota drive shaft. Yukon spool.
Wheels
Hummer double bead locks with rubber insert cut down. Trail worthy fab centers and rock rings. With 42" super swamper TSL's no plugs cuts etc. little rock rash but very decent tires. One spare wheel set up just no tire.
Misc: 4 ridged industries dually lights front and diffused pattern for rear, 20" ridged industries combo light bar up top. twisted Stitch suspension seats made extra wide with Google pocket and back zipper pouch and headrest with removable cushion. griffin radiator trans cooler combo with fan. RCI fuel cell custom length holds ~14 gallons. Derale 8" cooler with fan for steering. Removable steering wheel. G-Force 5 point harnesses. Every line and fitting is stainless braided or manufacture recommended. All fittings are matching blue and red anodized from Fragola or Earls. Drive shafts are 2" .250 DOM Toyota ujoints with spare chromo ujoints from trail gear. CB with with 4' firestik. 8" Polk audio waterproof speaker and amp. Green LED interior neon lights
Price as it sits $14,000.00 OBO
Without wheels and tires $10,000 OBO
Chassis with motor trans transfer case wiring plumbing radiator fuel cell gauges and dash shifter drive shafts all steering $7,000 OBO
Wheel base is 116'' belly ~21'' overall heigh is around 77" < might need to check that.
Please don't waste my time but if seriously interested can provide more pictures and even a few videos over text.
Engine
-1995 4.3 vortec ~115k miles
Howell efi harness ecm and tuning
Pace setter headers wrapped with DEI exhaust wrap. Wired professionally with relays very weather resistant fuses and loom.
Trans
-TH350 just built last summer, new gears and clutches, full rebuild kit, pump, torque converter, full RMVB.
- Artcarr sidewinder gated shifter open from R-N-1
Transfer case
NP205 twin stick kit not sure on brand CV flanges with Toyota pattern.
Suspension
4 link front and rear
14" ORI stx struts in the front
16" ORI stx struts in the rear
1.5" x .250 DOM upper links
2" 7075 Aluminum lower links
Chromo heims from Midwest 7/8" lower 3/4" uppers
Axles
Chevy Dana 60 front Artec industries truss
Yukon 5.38 gears and spool professionally setup. TMR diffguard. Solid industries knuckles. Solid industries high steer arms with double sheer kit from Artec Industries. 1.5" .250 DOM tie rod. PSC 8" SE ram. 3/4 ton disc brake conversion. Stainless AN brake lines. CV flange for Toyota drive shaft. Yukon chromo shafts with super joints. Sunfire Offroad drive flange kit.
Rear 14 Bolt full float Artec industries truss with pinion guard. USA standard or Yukon 5.38 machines down gears. TMR diff guard and shave kit. 3/4 ton Disc brake conversion. CV flange for Toyota drive shaft. Yukon spool.
Wheels
Hummer double bead locks with rubber insert cut down. Trail worthy fab centers and rock rings. With 42" super swamper TSL's no plugs cuts etc. little rock rash but very decent tires. One spare wheel set up just no tire.
Misc: 4 ridged industries dually lights front and diffused pattern for rear, 20" ridged industries combo light bar up top. twisted Stitch suspension seats made extra wide with Google pocket and back zipper pouch and headrest with removable cushion. griffin radiator trans cooler combo with fan. RCI fuel cell custom length holds ~14 gallons. Derale 8" cooler with fan for steering. Removable steering wheel. G-Force 5 point harnesses. Every line and fitting is stainless braided or manufacture recommended. All fittings are matching blue and red anodized from Fragola or Earls. Drive shafts are 2" .250 DOM Toyota ujoints with spare chromo ujoints from trail gear. CB with with 4' firestik. 8" Polk audio waterproof speaker and amp. Green LED interior neon lights
