spacecwboy
Member
- Joined
- Jun 9, 2015
- Messages
- 11
SXOR single seat, rear engine buggy for sale or trade. Located in Silsbee TX, 77656, close to Houston TX. $22k obo. Will consider trades for 4 seat rigs, hot rods/classic vehicles, boat, travel trailers, tractor or???
This thing is over built and will make someone a great rig for years to come. I dont get to go wheeling enough to justify keeping something like this just sitting here. Im sure I will forget some stuff, but this is a basic run down.
SXOR single seat chassis
347 Stroker Motor with FAST fuel injection system
C6 Transmission
ATLAS 2 tcase
King triple bypass shocks front and rear
King reservoir coilovers in rear
Bilstein reservoir coilovers in front
PSC full hydro steering
Warn RC 9.0 winch up front
Warn suck down winch in back
12voltguy switch panel with winch controllers
B&M shifter
15 gallon fuel cell
Front- Dodge D60 cut and flipped for high pinion, chromolly shafts, locker, yukon u-joints, drive flanges
Rear- Spider 9, dutchman axles, spool, strange high pinion 3rd member
Trail Ready aluminum beadlocks with 39" red label Krawlers
Mastercraft seat, 5 pt harness
LED lightbar and rock lights
just got back from Moab Utah, it did great. It is small and nimble with a ton of horsepower. I am 6'2" 175lb. I fit just fine, but keep in mind it is a small single seat rig, it is meant to be small so it is tight no matter what. Rig is 100% ready to run and I would load it up tomorrow and go anywhere as is.
Will sell or trade. Interested in street legal 4 seat rigs, boats, classic cars, pretty much anything that interests me. I just cant go as much as I want anymore and hate seeing something like this just sit in my shop all the time. Make and offer/trade. Will ship
Ford 302 with Stroker kit to 347 (motor initially came from a mustang)
Estimated between 425-450 hp (has not been on a dyno)
Scat Crank and Rods
Weisco Pistons
Oversized Valves
Either 10:2 or 10:4 compression (he couldn't remember exactly)
GT40 Heads
Trickflow Stage 2 Cam (nitrous cam)
FAST Fuel Injection W/programmer
Either a 48 or 52 cc Head (couldn't remember)
Double Timing Chain
MSD 6L Ignition
High Vol. oil pump
500 HP Crank Kit
Precision Balanced
5200 Rev Limiter
C6 has a 2000 stall
__________________
This thing is over built and will make someone a great rig for years to come. I dont get to go wheeling enough to justify keeping something like this just sitting here. Im sure I will forget some stuff, but this is a basic run down.
SXOR single seat chassis
347 Stroker Motor with FAST fuel injection system
C6 Transmission
ATLAS 2 tcase
King triple bypass shocks front and rear
King reservoir coilovers in rear
Bilstein reservoir coilovers in front
PSC full hydro steering
Warn RC 9.0 winch up front
Warn suck down winch in back
12voltguy switch panel with winch controllers
B&M shifter
15 gallon fuel cell
Front- Dodge D60 cut and flipped for high pinion, chromolly shafts, locker, yukon u-joints, drive flanges
Rear- Spider 9, dutchman axles, spool, strange high pinion 3rd member
Trail Ready aluminum beadlocks with 39" red label Krawlers
Mastercraft seat, 5 pt harness
LED lightbar and rock lights
just got back from Moab Utah, it did great. It is small and nimble with a ton of horsepower. I am 6'2" 175lb. I fit just fine, but keep in mind it is a small single seat rig, it is meant to be small so it is tight no matter what. Rig is 100% ready to run and I would load it up tomorrow and go anywhere as is.
Will sell or trade. Interested in street legal 4 seat rigs, boats, classic cars, pretty much anything that interests me. I just cant go as much as I want anymore and hate seeing something like this just sit in my shop all the time. Make and offer/trade. Will ship
Ford 302 with Stroker kit to 347 (motor initially came from a mustang)
Estimated between 425-450 hp (has not been on a dyno)
Scat Crank and Rods
Weisco Pistons
Oversized Valves
Either 10:2 or 10:4 compression (he couldn't remember exactly)
GT40 Heads
Trickflow Stage 2 Cam (nitrous cam)
FAST Fuel Injection W/programmer
Either a 48 or 52 cc Head (couldn't remember)
Double Timing Chain
MSD 6L Ignition
High Vol. oil pump
500 HP Crank Kit
Precision Balanced
5200 Rev Limiter
C6 has a 2000 stall
__________________
