SPOA87YJ
coo-whip
- Joined
- Aug 3, 2008
- Messages
- 127
Combined some stuff into one thread. These parts are priced to sell as they need to go! Located in Charlotte.
(1) $400 firm. 23 spline NP231J with JB conversions Super Shorty SYE kit. Installed a new chain 3 years ago. Here is a link to the SYE kit.
http://www.jbconversions.com/products/sye/np231j_short_sye.php1310 yokes. This kit is excellent! Full 32 spline output with the option of upgrading to a 1350 yoke/flange while still keeping your speedometer.
It was gone through 3 months ago and everything is in good shape.
(2) $200 firm. AXLE IS OUT OF RIG READY TO BE PICKED UP!
74/75 W250 Dodge Dana 60--8x6.5--Drum brakes
WMS is 65"
4.10 gears
Welded
Set up for spring over
Ruff stuff 3/8" traction bar mount
Ruff stuff anti-wrap spring perches
1330 yoke
Diff Cover
Brakes lines included
NO e-brake cables
Axle is set up for spring over yj.
(3) Stock XJ rear springs. $50
(4) Delta Gullwing plastic toolbox for fullsize. Black. $50
(5) NP233 out of s10. $50
(6) $100 YJ FLAT skid. 1/4" diamond (IIRC). Flipped over for smooth side down. Bolts right up to a yj frame using the factory bolt holes. I ran it on my rig with a rear stretch. It will need to be trimmed to fit a stock wheelbase jeep.
(1) $400 firm. 23 spline NP231J with JB conversions Super Shorty SYE kit. Installed a new chain 3 years ago. Here is a link to the SYE kit.
http://www.jbconversions.com/products/sye/np231j_short_sye.php1310 yokes. This kit is excellent! Full 32 spline output with the option of upgrading to a 1350 yoke/flange while still keeping your speedometer.
It was gone through 3 months ago and everything is in good shape.
(2) $200 firm. AXLE IS OUT OF RIG READY TO BE PICKED UP!
74/75 W250 Dodge Dana 60--8x6.5--Drum brakes
WMS is 65"
4.10 gears
Welded
Set up for spring over
Ruff stuff 3/8" traction bar mount
Ruff stuff anti-wrap spring perches
1330 yoke
Diff Cover
Brakes lines included
NO e-brake cables
Axle is set up for spring over yj.
(3) Stock XJ rear springs. $50
(4) Delta Gullwing plastic toolbox for fullsize. Black. $50
(5) NP233 out of s10. $50
(6) $100 YJ FLAT skid. 1/4" diamond (IIRC). Flipped over for smooth side down. Bolts right up to a yj frame using the factory bolt holes. I ran it on my rig with a rear stretch. It will need to be trimmed to fit a stock wheelbase jeep.
