pbmcauliffe
Well-Known Member
So in getting ready for next years comp season, we decide to change some cosmetic things as well. We rarely have people in the back, and are going for a more streamlined look, so the back of the cage was removed, seat taken out and a different back section was done. The fuel cell is being moved and a removable spare tire mount will go in with room for the dog or cooler in back. A removable light bar is being built, race radio and intercom will be installed with a 7" color monitor with 2 cameras to watch tires, new PRP seats, a 4.3 Atlas and going lower with more uptravel, 35" radial Rockers and getting more steering out of the Spider 9's now that the tires wont hit the frame as much.
Started putting the new G3 hiline fenders from our new sponsor, Genright, on today.
Got the Genright rockers and rear corners on, finished trimming the hood, and started putting the fuel cell in its new location, dropped the whole rig down 2.5" from before.
Sitting at full compression, would love to keep it this low, but the steering is touching the frame, and the rear links and mounts are touching the tub.
Started putting the new G3 hiline fenders from our new sponsor, Genright, on today.
Got the Genright rockers and rear corners on, finished trimming the hood, and started putting the fuel cell in its new location, dropped the whole rig down 2.5" from before.
Sitting at full compression, would love to keep it this low, but the steering is touching the frame, and the rear links and mounts are touching the tub.