rhamner
Well-Known Member
I have a th400, it is a 4wd version. In working condition. It has a piece of the bell housing missing which included a mounting hole when it broke off. Was like this before I bought it so not sure how it happened. It can be seen in the first two pictures attached, it is on the driver side of the trans just above the dowel pin. The output shaft has been swapped for a 10 spline shaft to be adapted to receive a np205 adapter, and older np205 which has a male 10 spline shaft, connected to the trans by a coupler sleeve inside the adapter. Asking $275 Located in Prattville, AL