Sold/Expired TH400 to a NP241 adapter

[3 tons o fun]

Its the short style. that for the long TH400 tailshaft about 2.5 to 3 inches cant remember.
Im looking for one just in case I need it when I pull my trans and cases out. I still cant see where all the fluid was coming from.

 

[blacksheep10]

oh, you have a 241 box in there, not a 203? cool. my dad has one, unfortunately he still uses it to feed silage with. can't wait til I scrap that one

 

[3 tons o fun]

No I have a 203 . I just drilled and tapped the 203 to fit the adapter. So I wouldnt have to change the tailshaft in the tranny when I was doing the doubler.

 

[blacksheep10]

ah. just adds about 2" to the length.

 

[3 tons o fun]

Yep , Kinda helps front driveshaft angle too.

 

[cheap2.5]

http://www.transmissioncenter.net/hardened_shafts_and_drums.htm Try this place.Should be about half way down the page.

 

[3 tons o fun]

Sweet, Thanks

 

[Juan_Hong_Loe]

Sounds made up!

 

[3 tons o fun]

Sounds made up!

It is as always.






Neal