Tone rings

[Metchosin joe]

I've been spamming this around. Looking for a 4 inch inside diameter tone ring to put on a Ford d60/d50 hub. I know the jeep guys have some options I'm looking for a factory 55 tooth tone ring to rob off of something. Some one out there must have found an option

 

[Bebop]

4th generation manual locking hubs conversion

After months of research I'm starting a thread on the process of converting my 2012 regular cab dually to manual locking hubs. I'll try to document & photograph everything as it progresses, that way anyone can find the info they need to convert a 2010 and up dodge ram. First and foremost, a...

www.cumminsforum.com

 

[Metchosin joe]

4th generation manual locking hubs conversion

After months of research I'm starting a thread on the process of converting my 2012 regular cab dually to manual locking hubs. I'll try to document & photograph everything as it progresses, that way anyone can find the info they need to convert a 2010 and up dodge ram. First and foremost, a...

www.cumminsforum.com

I have been searching for one of those rings and or a 2000 - 20001 dodge 2wd wheel bearing with the ring on the hub. Hard to find just the ring

 

[Bebop]

Buying the WFO ring would make your life easy

 

[Metchosin joe]

I found these

Dorman Products - 917-530

ABS Tone Ring for CV Axle - FoMoCo

www.dormanproducts.com

I'm going to get the hubs turned down and see how it goes.
I'll report back if any one else is looking to do the swap

 

[Bebop]

54 tooth, not 55 though

 

[Metchosin joe]

It's the closest I can find. I'll try it out