mr.mindless
Active Member
Have a matched set of stock axles from a '95 v10 Ram, 4.10 gears
D60 front, CAD is disabled (by previous owner, no details), needs at least one ball joint.
D70 rear, appears to be fresh brakes.
$600
2 bare 95-97 Ford D60 housings, $150 ea
97 Dodge 3500 D60 with Ford knuckles-out, CAD operational, DRW hubs, 4.10, good ujoints and BJs. $800.
SOLD - 47RH and 241DHD case from the same truck.
400/200 or 500 all
axles from my last crawler
'78-79 Ford D60. all chromo axles, Spicer ujoints, lockright, drive slugs. has brackets for parallel 4 link + panhard, shocks, coil springs, DOM inverted T low steer setup on top of knuckles with TREs.
'95 Ford 10.25. stock shafts, welded.
Both axles have 5.38s but I discovered they each have about 2.5 broken teeth each.
$1500 obo. bracket cleanup, gear install negotiable.
Divorced 203-205 doubler. 1350 input and front output yokes, 1350 rear CV flange. Can include all shafts (or just the useful ones to you) and my shifters for the right price. Midshaft is slip yoke to 44RE.
$750
(4) 15-42r20 SuperSwamper SX2s on black steel March Racing Wheels. DOT compound
20x8 wheels, 3.5" BS, 8x6.5 lug pattern.
95+% tread, none have under 1/2" in the center.
No plugs or patches that I recall or can see. I'm their first owner.
$1800
Also have single old style MT/R 40x12.5r17, can include it on an H2 along with enough airsoft to balance them all for $2k.
6 H2 wheels, various conditions. Some matte some chrome, some rock rashed, some need rock rings welded on the run. $25ea.
They've been raced on.
Located in Rochester NY
Willing ship on your dime. I'll skid and arrange shipping to a dock of your choice for $50+ the ride for the BIG stuff.
all reasonable offers considered.
trades I'd interested in are 7075 material for links, 1.25" heims, 2.5" x 14 Factory series coilovers or 3"x14 and 16" name-brand springs in the 125-200# range.
also 600cc and up shaft-drive atv engine and trans complete swap, or sub-2 litre rear-drive car engine, trans and accessories.
email to [email protected], or text to 585.935.7129 preferred.
Not sure if Pirate will let me link the images, if they don't work let me know and I'll re-host.
D60 front, CAD is disabled (by previous owner, no details), needs at least one ball joint.
D70 rear, appears to be fresh brakes.
$600
2 bare 95-97 Ford D60 housings, $150 ea
97 Dodge 3500 D60 with Ford knuckles-out, CAD operational, DRW hubs, 4.10, good ujoints and BJs. $800.
SOLD - 47RH and 241DHD case from the same truck.
400/200 or 500 all
axles from my last crawler
'78-79 Ford D60. all chromo axles, Spicer ujoints, lockright, drive slugs. has brackets for parallel 4 link + panhard, shocks, coil springs, DOM inverted T low steer setup on top of knuckles with TREs.
'95 Ford 10.25. stock shafts, welded.
Both axles have 5.38s but I discovered they each have about 2.5 broken teeth each.
$1500 obo. bracket cleanup, gear install negotiable.
Divorced 203-205 doubler. 1350 input and front output yokes, 1350 rear CV flange. Can include all shafts (or just the useful ones to you) and my shifters for the right price. Midshaft is slip yoke to 44RE.
$750
(4) 15-42r20 SuperSwamper SX2s on black steel March Racing Wheels. DOT compound
20x8 wheels, 3.5" BS, 8x6.5 lug pattern.
95+% tread, none have under 1/2" in the center.
No plugs or patches that I recall or can see. I'm their first owner.
$1800
Also have single old style MT/R 40x12.5r17, can include it on an H2 along with enough airsoft to balance them all for $2k.
6 H2 wheels, various conditions. Some matte some chrome, some rock rashed, some need rock rings welded on the run. $25ea.
They've been raced on.
Located in Rochester NY
Willing ship on your dime. I'll skid and arrange shipping to a dock of your choice for $50+ the ride for the BIG stuff.
all reasonable offers considered.
trades I'd interested in are 7075 material for links, 1.25" heims, 2.5" x 14 Factory series coilovers or 3"x14 and 16" name-brand springs in the 125-200# range.
also 600cc and up shaft-drive atv engine and trans complete swap, or sub-2 litre rear-drive car engine, trans and accessories.
email to [email protected], or text to 585.935.7129 preferred.
Not sure if Pirate will let me link the images, if they don't work let me know and I'll re-host.