Toyata rear ifs axle swap ?

krackem

Build-Bend-Weld-Break -Repeat
Joined
Mar 8, 2012
Messages
906
Location
Chattanooga,Tn
So I'm wanting to swap in 86 4runner ifs rear axle into my 85 4runner (still leafs all around) from what i understand(if I'm correct??)I'll gain 1.5 inches of clearance on both sides, and wanting to know if you have the move the spring perches on the ifs rear axle or will they work as they are I'd rather do that than spacers to gain the clearance I want and need might take pics and do a build thread for others wanting to do
 
Re: Toyata rear ifs axle swap ?

I think they are the same location all the way up to a 96 axle. But if not just cut and move.
 
Re: Re: Toyata rear ifs axle swap ?

What about the gear ratio. Im assuming that the difference 4.10/4.11 wouldn't matter.



Sent from my DROID RAZR using Tapatalk 2
 
Direct swap. A Tacoma rear is too and is MUCH stronger. Just need to beef the housing up where the spring perches are.
 
Thank y'all what I wanted to know thought so but was 100% and using my third cus its got my spool already setup in it
 
Back
Top