Molly Hatchet
Well-Known Member
- Joined
- Oct 15, 2011
- Messages
- 366
Molly is for Sale. If you or know someone looking for a super reliable maliciously maintained trail bouncer she is a good one for sure. Only reason for selling is I put together another rig and don't need two. I would sell Molly to my best friend I trust her that much.
Parts list:
Partly 1979 Toyota FJ with custom cage and tube work custom fuel cell, panel work, Nicest new Coreabu seats, mile marker winch, LEDs all around, aluminum top. Molly has been wheeled not a show queen but well taken care of.
Parts list:
LS 5.3 cam, springs, heavy head work, trunion kit, injectors, oil cooler,Accusump, hugger headers, Tuned by Marty Gibbs with Gas It LSX. Runs really strong... (no I'm not claiming 500hp)
Well Built turbo 400 PTC converter
Atlas 3.0 (5.88 in axles) crawls really well and heats em up when needed.
Full hydro steering with PSC and Howe components.
All 1410 joints
Rear axle: Dana 60, ARB, custom Mark Williams 35 spline 300m shafts willwood calipers
Front axle: Dana 60, ARB, all yukon 35 spline chrome moly shafts, drive flanges, Solid Industries Inner C's and solid knuckles (stronger than Reids IMO because they're keyed for the steering arms), new truss and C's installed by JDuck. He did awesome reworking the front.
4 link rear, 3 link front, all 7075 aluminum links 1.25 hiems, Fox 14 coilovers PAC springs all tuned by Ryan and Accutune in California, the remote reservoirs have on the move low and high speed adjusters that actually work! TK1 racing ultra4 sway bar. Very stable.
42 inch sticky Treps on Life time Trail Ready's, WB 112ish
If I list any where else I will price at 30k
Current Hardline price is 25k. North Georgia, message me with questions thanks
Sent from my iPhone using Tapatalk
Parts list:
Partly 1979 Toyota FJ with custom cage and tube work custom fuel cell, panel work, Nicest new Coreabu seats, mile marker winch, LEDs all around, aluminum top. Molly has been wheeled not a show queen but well taken care of.
Parts list:
LS 5.3 cam, springs, heavy head work, trunion kit, injectors, oil cooler,Accusump, hugger headers, Tuned by Marty Gibbs with Gas It LSX. Runs really strong... (no I'm not claiming 500hp)
Well Built turbo 400 PTC converter
Atlas 3.0 (5.88 in axles) crawls really well and heats em up when needed.
Full hydro steering with PSC and Howe components.
All 1410 joints
Rear axle: Dana 60, ARB, custom Mark Williams 35 spline 300m shafts willwood calipers
Front axle: Dana 60, ARB, all yukon 35 spline chrome moly shafts, drive flanges, Solid Industries Inner C's and solid knuckles (stronger than Reids IMO because they're keyed for the steering arms), new truss and C's installed by JDuck. He did awesome reworking the front.
4 link rear, 3 link front, all 7075 aluminum links 1.25 hiems, Fox 14 coilovers PAC springs all tuned by Ryan and Accutune in California, the remote reservoirs have on the move low and high speed adjusters that actually work! TK1 racing ultra4 sway bar. Very stable.
42 inch sticky Treps on Life time Trail Ready's, WB 112ish
If I list any where else I will price at 30k
Current Hardline price is 25k. North Georgia, message me with questions thanks
Sent from my iPhone using Tapatalk
