F fatguy7814 Well-Known Member Joined Sep 9, 2008 Messages 155 Location Huntsville, AL Jul 3, 2014 #1 Having trouble holding everything together and getting splines lined up. Not enough hands.
Neal3000 Well-Known Member Joined May 14, 2009 Messages 3,182 Location Temple, GA Jul 3, 2014 #2 Get a peice of threaded rod and clamp together the inner part then put the case over it bolt together and then pull the rod out, you'll have to find the right combo of washers/spacers to make it all work
Get a peice of threaded rod and clamp together the inner part then put the case over it bolt together and then pull the rod out, you'll have to find the right combo of washers/spacers to make it all work
F fatguy7814 Well-Known Member Joined Sep 9, 2008 Messages 155 Location Huntsville, AL Jul 3, 2014 #3 Thank you sir!!
S stano Well-Known Member Joined Mar 9, 2012 Messages 537 Jul 3, 2014 #4 I set it on the floor and used a knee to hold it together and still had both hands to work with. Sent from my iPhone using Tapatalk
I set it on the floor and used a knee to hold it together and still had both hands to work with. Sent from my iPhone using Tapatalk