I have a recently rebuilt True Hi9 3rd - it only has 3 or 4 rides since the rebuild. No problems with it whatsoever, I just changed to 43" stickies and do not want to tear this high dollar 3rd up so I'm going 14B.
4.86 Gears
35 Spline Spool
Solid Spacer
Extra Load Bolt (2 total)
Billet 1350 Yoke
BTF True Hi9 Skidplate
and a set of 5 x 5.5 35 Spline 9" Semi-Float Axles with bearings pressed on for a big bearing housing with 63 WMS
***This is not a complete axle - Just a 3rd & shafts with bearings***
$1900.00 OBO shipped. I'll have my mechanic check everything over & slap a fresh coat of paint on it before I ship it. I may even have a new set of axle bearings I can throw in as well.
Email [email protected] or PM me on here if you have any questions.
4.86 Gears
35 Spline Spool
Solid Spacer
Extra Load Bolt (2 total)
Billet 1350 Yoke
BTF True Hi9 Skidplate
and a set of 5 x 5.5 35 Spline 9" Semi-Float Axles with bearings pressed on for a big bearing housing with 63 WMS
***This is not a complete axle - Just a 3rd & shafts with bearings***
$1900.00 OBO shipped. I'll have my mechanic check everything over & slap a fresh coat of paint on it before I ship it. I may even have a new set of axle bearings I can throw in as well.
Email [email protected] or PM me on here if you have any questions.
![nov[1]. 06 cam pics. 014.JPG](https://cdn.hardlinecrawlers.com/xfmg/thumbnail/30/30808-c6b5635b479852945c6b1ee2c864e211.jpg?1683572195)
