warpaintfab#1
Well-Known Member
- Joined
- Nov 30, 2010
- Messages
- 267
- Reaction score
- 0
I got this Tacoma chassis and have made it a roller and just haven't had time to work on it lately so thought I would put it up for sale. It is very well built and has had a lot of time put into it up until this point. Will make a awesome truggy when completed.
-Regular cab Tacoma cab and front clip
-1 3/4 DOM chassis
-Links are 2" .250 wall DOM
-Joints are 1 1/4 and 3/4 on 7/8 barnes 4x4 Heims with high misalignment spacers
-Front axle is a Dana 44 with hysteer, barnes diff cover, lockrite, 4.10 gears
-Rear axle is a currie hi9 with a detroit, 4.10 gears
-Tires are 42 TSLs mounted on new black rock crawlers
I was planning on running a turbo toyota motor/5spd/dual cases but pretty much any power train should work. Interior is also completely apart but is pretty much all there. I also have no ***le for it. Im asking 3500 or possible trade. Call or text 828-508-0979 with questions. Thanks
-Regular cab Tacoma cab and front clip
-1 3/4 DOM chassis
-Links are 2" .250 wall DOM
-Joints are 1 1/4 and 3/4 on 7/8 barnes 4x4 Heims with high misalignment spacers
-Front axle is a Dana 44 with hysteer, barnes diff cover, lockrite, 4.10 gears
-Rear axle is a currie hi9 with a detroit, 4.10 gears
-Tires are 42 TSLs mounted on new black rock crawlers
I was planning on running a turbo toyota motor/5spd/dual cases but pretty much any power train should work. Interior is also completely apart but is pretty much all there. I also have no ***le for it. Im asking 3500 or possible trade. Call or text 828-508-0979 with questions. Thanks
