Sold/Expired Turbo 22r aw4 40€ stickie treps chassis

stuftmunky2k · Oct 23, 2017

Buggy will be getting torn down starting November 6th.

Motor will be sold turn key. Built 22r turbo on propane from gotpropane. Motor has 12 trips on it. Bored .060 over, cam, head work, head studs, mls gasket, hypertectic pistons, new psc pump with 2 trips on it, new alternator with 1 trip on it, new dizzy, crane ignition box with rev limiter, will come with 4 propane tanks. $2500

Trans is aw4 with toyota bell housing it is currently bolted to the 22r. Running winters shifter that makes the trans a manual valve body. Will include shifter with transmission sell and everything to bolt to toyota motor will also include spare transmission. $900

5 stickie 40€ treps mounted on aluminum walker evens double beadlocks toyota pattern. 4€ or so back spacing. 4 tires mounted one has no wheel for spare. I will not separate tires from wheels. $3000 obo

Located in marysville ohio call or txt 937-243-twoninetwofive

willing to travel to help make a deal with a deposit. WILL NOT SHIP

Looking for hi pinion 9€ thirds, 39 reds on 8x6.5 beadlocks, rear steer axle.

Sent from my iPhone using Tapatalk

Jcampbell54 · Oct 25, 2017

Will a toy gear driven transfer bolt to that trans?

Sent from the mans IPhone.

easleycrawler · Oct 25, 2017

Re: Turbo 22r aw4 40" stickie treps chassis

Willing to sale just the shifter?

karatejosh · Oct 25, 2017

Already tried lol

Sent from my SM-G930V using Tapatalk

stuftmunky2k · Oct 25, 2017

Jcampbell54 said:
Will a toy gear driven transfer bolt to that trans?

Sent from the mans IPhone.

It will not the input is different diameter then output. A dana 300 will bolt right up tho. I have a atlas behind it.

Really would like to sell the shifter with the transmission to make it a complete package

stuftmunky2k · Nov 9, 2017

Re: Turbo 22r aw4 40" stickie treps chassis

Buggy is in process of getting torn down

BIG_BLAZER86 · Nov 10, 2017

Re: Turbo 22r aw4 40" stickie treps chassis

Is the chassis all tube,or is it a juggy?

stuftmunky2k · Nov 10, 2017

Re: Turbo 22r aw4 40" stickie treps chassis

BIG_BLAZER86 said:
Is the chassis all tube,or is it a juggy?

All tube

red94yj · Nov 11, 2017

Re: Turbo 22r aw4 40" stickie treps chassis

What's the compression ratio on the 22r? Other than the 60 overbore are pistons from a certain factory application or custom?
Was this engine originally a turbo setup?
What manifold and what turbo?

stuftmunky2k · Nov 11, 2017

Re: Turbo 22r aw4 40" stickie treps chassis

red94yj said:
What's the compression ratio on the 22r? Other than the 60 overbore are pistons from a certain factory application or custom?
Was this engine originally a turbo setup?
What manifold and what turbo?

Motor is roughly 8.5-9:1 on the compression
Pistons are sealed power hypertectic pistons. Pistons of all sizes are readily available for this motor
Motor was specificly built for the turbo. But was an original 22re
Turbo and manifold is from got propane.

stuftmunky2k · Nov 14, 2017

Re: Turbo 22r aw4 40" stickie treps chassis

Motor is pulled and ready to party

stuftmunky2k · Nov 15, 2017

Sent from my iPhone using Tapatalk

cj7-377 · Nov 18, 2017

Re: Turbo 22r aw4 40" stickie treps chassis

Someone buy this so I can stop drool over it bump for ya

stuftmunky2k · Nov 19, 2017

Re: Turbo 22r aw4 40" stickie treps chassis

Thanks man will make a hell of a deal with someone

stuftmunky2k · Nov 22, 2017

Re: Turbo 22r aw4 40' stickie treps chassis

stuftmunky2k · Nov 28, 2017

Bueller

84mallcrawl · Nov 29, 2017

derail

what gear set do you have in the atlas and axles, and what did you like/ not like the setup?

stuftmunky2k · Nov 29, 2017

3.8 in atlas 5.29 in axles on 40s. Loved the setup if i ran it again i would put a little bigger stall on convertor thats the onlything i would change. Its a stock convertor think its at roughly 1800 i would try a 2200-2400 but thats just me.