syko
Member
This buggy is sold
Chassis:
48" Twisted Customs
Engine:
LQ9 6.0 V8
Aftermarket Wiring Harness from Street & Peformance
Kevco Trapdoor oil pan
Transmission:
4L60E
Stock Stall Converter
Corvette Servo
Bigger Sprag
4L65 basket with extra clutches
AA Adapter and VSS
Transfer Case:
Atlas 3.0
1350 & 1410 Yokes
Front Axle:
04 Dana 60 narrowed to (78-79 width) 3.5" tubes
Artec truss with hydro mount
Reid Racing inner & outer knuckles
Detroit Locker
5.38 Gears
Ten Factory Chrome Molly 35 Spline Inner and Outer Axles
Rock and Roll Solid Drive Flanges
Ballistic Diff. Cover
1/2 Ton Calipers
Rear Axle:
97 E350 Dana 60 narrowed to 78-78 width 3.5: tubes with full truss large bore spindles (not drilled)
Detroit Locker
5.38 Gears
Branik Chrome Molly 35 Spline Double splined Axles
East coast Gear bolt on Flanges
Ballistic Diff. Cover
1/2 Ton Calipers
Steering:
Complete PSC double ended ram setup with optional rear steer port in orbital
Suspension:
1inch Cromo Spidertrax Uppers
2inch Cromo Spidertrax Lowers
1 1/4 Midwest Heims
3/4 FK Heims
2.5 14" Radflow Dual Rate Coilover Front (Custom Erik Miller 15" of travel)
2.0 14" RadFlow Dual Rate Coilover Rear
4" RadFlow Air Bumps On All Corners
Front Tires - 39inch BFG KRTB on 17inch Monster Bead Locks Wheels
Rear Tires- 39inch BFG KRTB on 17inch Monster Bead Locks Wheels
Misc Info-
8K Comp Winch with synthetic Rope (120 Foot plus or minus)
Corbeau Seats
Artcar Shifter
Autometer Gauges
Afco 19x22 Radiator with Taurus Fan and Shroud
Custom 13x18 Griffin Trans cooler with Spal Fan and Shroud
All Braided Lines and AN Fittings
Bladder Style Fuel Cell, 4 Walbro Pickups, and Remote Fill
Willow Wood Dual Remote Master Cylinders and Pedal Assembly
CNC Push Pull Cutting Brake
police siren
Ruff Stuff Intercom with Headsets
IC-8000 Icom Ham radio with 1/4 wave antenna
PCI Race Air System
The wheelbase is 103". The chassis is 6'3" set with 7" of up travel. With a spare mounted on the back and full of fluids the buggy weighed 3750lbs. (1925 front and 1875 rear) This is a very balance rig
I'm sure there is a lot I've missed but you get the point.
This thing is ready to race and works very well. It passed tech 2010 KOH. The car has raced RCQ, Badlands, Windrock, Blah blah all over.
Price:
Price $23,000.00
or trade for a 25' - 27' Baja cuddy boat
Shawn
(502)338-1777
[email protected]
Chassis:
48" Twisted Customs
Engine:
LQ9 6.0 V8
Aftermarket Wiring Harness from Street & Peformance
Kevco Trapdoor oil pan
Transmission:
4L60E
Stock Stall Converter
Corvette Servo
Bigger Sprag
4L65 basket with extra clutches
AA Adapter and VSS
Transfer Case:
Atlas 3.0
1350 & 1410 Yokes
Front Axle:
04 Dana 60 narrowed to (78-79 width) 3.5" tubes
Artec truss with hydro mount
Reid Racing inner & outer knuckles
Detroit Locker
5.38 Gears
Ten Factory Chrome Molly 35 Spline Inner and Outer Axles
Rock and Roll Solid Drive Flanges
Ballistic Diff. Cover
1/2 Ton Calipers
Rear Axle:
97 E350 Dana 60 narrowed to 78-78 width 3.5: tubes with full truss large bore spindles (not drilled)
Detroit Locker
5.38 Gears
Branik Chrome Molly 35 Spline Double splined Axles
East coast Gear bolt on Flanges
Ballistic Diff. Cover
1/2 Ton Calipers
Steering:
Complete PSC double ended ram setup with optional rear steer port in orbital
Suspension:
1inch Cromo Spidertrax Uppers
2inch Cromo Spidertrax Lowers
1 1/4 Midwest Heims
3/4 FK Heims
2.5 14" Radflow Dual Rate Coilover Front (Custom Erik Miller 15" of travel)
2.0 14" RadFlow Dual Rate Coilover Rear
4" RadFlow Air Bumps On All Corners
Front Tires - 39inch BFG KRTB on 17inch Monster Bead Locks Wheels
Rear Tires- 39inch BFG KRTB on 17inch Monster Bead Locks Wheels
Misc Info-
8K Comp Winch with synthetic Rope (120 Foot plus or minus)
Corbeau Seats
Artcar Shifter
Autometer Gauges
Afco 19x22 Radiator with Taurus Fan and Shroud
Custom 13x18 Griffin Trans cooler with Spal Fan and Shroud
All Braided Lines and AN Fittings
Bladder Style Fuel Cell, 4 Walbro Pickups, and Remote Fill
Willow Wood Dual Remote Master Cylinders and Pedal Assembly
CNC Push Pull Cutting Brake
police siren
Ruff Stuff Intercom with Headsets
IC-8000 Icom Ham radio with 1/4 wave antenna
PCI Race Air System
The wheelbase is 103". The chassis is 6'3" set with 7" of up travel. With a spare mounted on the back and full of fluids the buggy weighed 3750lbs. (1925 front and 1875 rear) This is a very balance rig
I'm sure there is a lot I've missed but you get the point.
This thing is ready to race and works very well. It passed tech 2010 KOH. The car has raced RCQ, Badlands, Windrock, Blah blah all over.
Price:
Price $23,000.00
or trade for a 25' - 27' Baja cuddy boat
Shawn
(502)338-1777
[email protected]
