Sold/Expired Ultra4 Pringle Fab Buggy - $30k Houston, TX

[Pringlefab]

Jimmy's 4x4 Chassis 1.5" DOM

• 5.3L Vortec Engine – 85mm BBK Intake, Kevco Oil Pan
• TH400 Transmission – Red Clutches, 4L80 Clutch cage, recent rebuild, Art Carr Shifter
• Atlas 4.3 Transfer Case
• 1410 Drive shafts – Front and Back
• Rear Axle – Dana 60 Center, 14 Bolt Outers, GM Disc Brakes, 35 Spline Detriot, 5.38 Gears
• Front axle – GM60, Detroit, Nitro 300M Joints, 35 Spline Chromo, Dedenbar Outer Knuckles, PSC Double Ended Ram, Trussed, Stage 8 Spindle Nuts, Flanged
• PSC 2.5 Dual ended ram with Hydro Assist brakes
• Raceline Monster Wheels (17x9.5) with 39" BFG KRT stickies, 5 wheels, 6 tires
• 16" ORI STX Struts on all corners
• 1-1/4" RuffStuff Heims on all Control arm ends, 2" x ¼" Wall DOM links
• 25 Gallon Fuel Cell, dual fuel pumps with all the Ultra4 regulations requirements (except foam)
• Corbeau Race Seats with 5 Point Harnesses (6 months old)
• 42" VisionX Light bar
• Ron Davis radiator with dual fans – capable to 800HP
• Warn XP9000i Winch with incab control
• Lowerance 7inch GPS, Race Radios, Police Siren/Horn

All major electrical is on self resettable circuit breakers
The car was built to the 2013 KOH rules and is about 95% finished. A few items need to be finished to be completely legal. It has raced in DirtRiot and a few other races to iron out all the bugs. I planned on racing it in 2014 KOH but business comes first. I am sure there are a lot of things that I have missed but feel free to ask.

$30k Located in Houston, TX

Can be reached at 713-409-8433 or [email protected]

 

[Pringlefab]

Re: Ultra4 Pringle Fab Buggy

 

[Pringlefab]

Hump day bump.

 

[ptweld]

GLWS

 

[Pringlefab]

Sold