Where to find bushings..

[MIG'DHORSE]

where can i find some bushings like these locally?

http://frontrangeoffroadfab.com/nfo...n.jpg?osCsid=68f43751fd5965b0370400cd2d619485

also, anyone running the FROR style tcase mount? do you know if you can reuse your stock bolts, or do you need the longer ones? trying to trim cost down a bit. thanks.:awesomework:

 

[MIG'DHORSE]

okay, well... where do you guys get your sleeved round bushing mounts, like the ones you get for motor mounts?

 

[Toyotanut]

where can i find some bushings like these locally?

http://frontrangeoffroadfab.com/nfo...n.jpg?osCsid=68f43751fd5965b0370400cd2d619485

also, anyone running the FROR style tcase mount? do you know if you can reuse your stock bolts, or do you need the longer ones? trying to trim cost down a bit. thanks.:awesomework:

I made my own fror mount and was able to reuse my old bolts, but I used 1/4" plate.

 

[CrustyJeep]

okay, well... where do you guys get your sleeved round bushing mounts, like the ones you get for motor mounts?

YJ spring bushings for me, with the appropriate DOM, usually 1.75x.250.

Or try here...
http://suicidedoors.com/4-LinkWeldonBarEnds.php

 

[MIG'DHORSE]

I made my own fror mount and was able to reuse my old bolts, but I used 1/4" plate.

badass. yea mine is out of 1/4", so i guess i can! thanks.:awesomework:

YJ spring bushings for me, with the appropriate DOM, usually 1.75x.250.

Or try here...
http://suicidedoors.com/4-LinkWeldonBarEnds.php

awesome thanks alot. i found them on ballistic, but for some reason they feel like they need to charge $18 each, because they put a zerk and a ballistic skull emblem on them:looser:

anyway, thanks again this will help me out building my crossmember!:awesomework:

 

[Toyotanut]

as far as the bushing end goes, I used 1.5 pipe and yj spring bushings w/ the sleave for 9/16th bolt. I'll have to look and see what thickness I used though. I don't remember if it was schedual 40 or schedual 80

 

[MIG'DHORSE]

sweet, man thanks.:awesomework: