Drivetrain:
02 GM 5.3 with Jim's Performance harness and tune.
Has truck intake, oil pan, and accessory drive.
Custom headers and 2.5" exhaust with a single Magnaflow muffler.
TH 400 transmission with stock converter.
Modified factory valve body so it will hold first gear at any rpm.
Clocked and Twin Sticked 205.
1350 yokes.
Axles:
-Front is a Chevy LP 60 with Dodge external style hubs.
5:13 Gears and welded carrier. Have 2 Loc Rites but never had any luck with them.
35 spline Chrome Moly inners and outers.
Have CTM joints to install just need rebuilt.
2x3 3/16" wall box tubing truss.
6" stroke DE ram with 3/4 heims on tie rods.
BTF diff cover and 1350 yoke.
-Rear is a 14 Bolt with BTF diff cover and brake brackets with 3/4 ton rotors and calipers.
5:13 Gears and Detroit Locker.
Also has a 2x3 3/16" truss
1350 yoke.
Chassis:
Based off a YJ frame and has a mix of 1.75 DOM and HERW tubing.
All links are 1.5" 1/4 wall DOM with 3/4 chrome moly heims.
Radflo 14" 2.0 coil overs front an rear with remote reservoirs on the rear.
Tires are 42 Iroks on 15x8 steel wheels. Have about 70-75% tread.
Misc:
Corbea Baja SS seats and Simpson Harnesses.
Quick Car switch panel and gauges (water and oil).
Tilton dual 3/4 master cylinders with single Wilwood pedal.
Steering is a factory pump with PSC cooler.
Full 1/8" aluminum top.
Speedway 22x19 radiator.
Smittybilt XRC 8 winch with synthetic rope.
15 gallon fuel cell.
Willis grill and hood.
1/4" wall front driveshaft
OK THIS WAS THE AD POSTED ABOUT THIS BUGGY WHEN I TRADED FOR IT HE WAS DOWN TO $15000 BUT NOW ITS UP TO $17000 THINGS IVE DONE HAD COMP. TUNED,TRANS BUILT WITH MANUAL REVERSE VALVE BODY WITH BRAKE,NEW PTC STALL,DIFF. SHIFTER,HAD SNAP IN WINDOWS MADE,NEW TR BEADLOCKS,NEW 43 SWAMPERS AND CUT EM ...LOCATED IN ASHLAND MS 70 MILES FROM JACKSON TN...662-224-4848....BUGGY IS 100% READY TO RIDE $17.000 need gone building house could mabe make deal on buggy.trailor,and duramax make offer on all but please dont waste my time if not interesred
02 GM 5.3 with Jim's Performance harness and tune.
Has truck intake, oil pan, and accessory drive.
Custom headers and 2.5" exhaust with a single Magnaflow muffler.
TH 400 transmission with stock converter.
Modified factory valve body so it will hold first gear at any rpm.
Clocked and Twin Sticked 205.
1350 yokes.
Axles:
-Front is a Chevy LP 60 with Dodge external style hubs.
5:13 Gears and welded carrier. Have 2 Loc Rites but never had any luck with them.
35 spline Chrome Moly inners and outers.
Have CTM joints to install just need rebuilt.
2x3 3/16" wall box tubing truss.
6" stroke DE ram with 3/4 heims on tie rods.
BTF diff cover and 1350 yoke.
-Rear is a 14 Bolt with BTF diff cover and brake brackets with 3/4 ton rotors and calipers.
5:13 Gears and Detroit Locker.
Also has a 2x3 3/16" truss
1350 yoke.
Chassis:
Based off a YJ frame and has a mix of 1.75 DOM and HERW tubing.
All links are 1.5" 1/4 wall DOM with 3/4 chrome moly heims.
Radflo 14" 2.0 coil overs front an rear with remote reservoirs on the rear.
Tires are 42 Iroks on 15x8 steel wheels. Have about 70-75% tread.
Misc:
Corbea Baja SS seats and Simpson Harnesses.
Quick Car switch panel and gauges (water and oil).
Tilton dual 3/4 master cylinders with single Wilwood pedal.
Steering is a factory pump with PSC cooler.
Full 1/8" aluminum top.
Speedway 22x19 radiator.
Smittybilt XRC 8 winch with synthetic rope.
15 gallon fuel cell.
Willis grill and hood.
1/4" wall front driveshaft
OK THIS WAS THE AD POSTED ABOUT THIS BUGGY WHEN I TRADED FOR IT HE WAS DOWN TO $15000 BUT NOW ITS UP TO $17000 THINGS IVE DONE HAD COMP. TUNED,TRANS BUILT WITH MANUAL REVERSE VALVE BODY WITH BRAKE,NEW PTC STALL,DIFF. SHIFTER,HAD SNAP IN WINDOWS MADE,NEW TR BEADLOCKS,NEW 43 SWAMPERS AND CUT EM ...LOCATED IN ASHLAND MS 70 MILES FROM JACKSON TN...662-224-4848....BUGGY IS 100% READY TO RIDE $17.000 need gone building house could mabe make deal on buggy.trailor,and duramax make offer on all but please dont waste my time if not interesred
