Rnuovrcj5
Active Member
I've gotten to the point where I just don't use this like I should. And I need a third seat for my daughter now too. I'm not really hurting to sell it but I'd like it out of the way.
Build thread:
http://www.pirate4x4.com/forum/general-4x4-discussion/505320-round-4-a.html
YJ based buggy, there's about 4 feet of frame left.
Body is narrowed about 12" It's currently got the CJ hood on it. YJ one is gone.
Toyota FJ80 E-locker axles, 5.29 gears, Longfields in the front, Chromoly shafts in rear, I've got ARP studs and RCV flanges on the way to fix the flange I popped last time I had it out. Mostly complete rear axle for parts as well (missing some locker pieces, used them on the axle in it now)
Full hydro steering, its got 2-3 rides on a new PSC pump, Just rebuilt the steering column and shaft. Surplus center double ended ram. Hi-ish steer.
3-link front, 4-link rear. All the links except the rear uppers are aluminum
Fox air Shox. 14" front 16" rear
39" Krawler red labels. Two new factory half treads and two full treads that are probably 3/4 tread
Brand new procomp beadlocks.
4.3 Vortec V6, TH350, D300 w/ 4:1 gear set and some sort of upgraded rear output.
I've got a couple of spare rear shafts to go with it as well as some random parts. I'm going to keep the grille as it was from my first vehicle. I think I've got another CJ grille that hasn't been cut down I'll include if wanted.
Located in Mooresville, NC, just north of Charlotte. I'd be willing to travel a bit to deliver it/meet someone.
Clean NC title in my name. 1988 YJ
$14k OBO TRADED
Build thread:
http://www.pirate4x4.com/forum/general-4x4-discussion/505320-round-4-a.html
YJ based buggy, there's about 4 feet of frame left.
Body is narrowed about 12" It's currently got the CJ hood on it. YJ one is gone.
Toyota FJ80 E-locker axles, 5.29 gears, Longfields in the front, Chromoly shafts in rear, I've got ARP studs and RCV flanges on the way to fix the flange I popped last time I had it out. Mostly complete rear axle for parts as well (missing some locker pieces, used them on the axle in it now)
Full hydro steering, its got 2-3 rides on a new PSC pump, Just rebuilt the steering column and shaft. Surplus center double ended ram. Hi-ish steer.
3-link front, 4-link rear. All the links except the rear uppers are aluminum
Fox air Shox. 14" front 16" rear
39" Krawler red labels. Two new factory half treads and two full treads that are probably 3/4 tread
Brand new procomp beadlocks.
4.3 Vortec V6, TH350, D300 w/ 4:1 gear set and some sort of upgraded rear output.
I've got a couple of spare rear shafts to go with it as well as some random parts. I'm going to keep the grille as it was from my first vehicle. I think I've got another CJ grille that hasn't been cut down I'll include if wanted.
Located in Mooresville, NC, just north of Charlotte. I'd be willing to travel a bit to deliver it/meet someone.
Clean NC title in my name. 1988 YJ
$14k OBO TRADED