Basics:
-1994 YJ
-4.0L rebuilt 3 years ago, trailer queen since.
-TF999 3 speed auto rebuilt 3 years ago, trailer queen since.
Front axle:
Dana 30 4.88, cross over steering, lockright locker with 4340 shafts, fairly new unit bearings, new ball joints, new rotors, new pads, and US Alloy outer seals.
Rear axle:
Ford 9â€, 4.88, Strange center section, full spool, 31 spline Yukon shafts, new wheel bearing/seals, new disk brakes.
Transfer case:
NP 231 with HD SYE, JE Reel long slip 1310 front shaft, 1310 CV rear, fresh joints.
Wheels/Tires:
37†Goodyear MTRs on 15†Mickey Thompson Aluminum wheels, full size matching spare on steel wheel. Tires are 85% or so.
Details:
-Full custom 6-point cage, tied to the frame in 6 locations, the rocker guards in 1 location, and also tied to the dash/cowl.
-Metal Fusion tube fenders.
-Corbeau Baja SS seats tied to the cage.
-3†Lap belts and 2†shoulder harnesses tied to the cage.
-PSC hydro assist steering box and ram. (NEW)
-Art Carr shifter.
-Wheelbase stretched to 105", leaf springs all four corners.
-BDS 2.5" YJ springs up front and stock YJ springs in the rear.
-Custom shackle reversal up front.
-15 gallon fuel cell, E2000 fuel pump.
-Cooler rack in the cargo area, cooler is included.
-LED tail lights.
-Rear traction bar mounted to removable cross member.
-Transmission has its own removable cross member.
-Nearly flat skid plate.
-Bikini top.
-New radiator, Optima red top, water pump, alternator and tune up last summer.
-M.O.R.E. "bombproof" motor mounts.
-Tranny cross member is mounted on poly bushings and hard mounted to the tranny.
-Line lock on rear brake line.
-E350 master cylinder, works great with 4 wheel brakes.
-Tube shock mounts on the front, Ford shock towers on the rear.
This is a very capable proven crawler ready to ride.
Disclaimers:
The Jeep has a lot of "character". Body has dents and scratches, tires and wheels have scratches and scuffs. The Jeep has a lot of life left in it though and everything there is solid.
Follow the link for more pictures.
http://fototime.com/inv/31B79339507F0F6
Asking $7,500
-1994 YJ
-4.0L rebuilt 3 years ago, trailer queen since.
-TF999 3 speed auto rebuilt 3 years ago, trailer queen since.
Front axle:
Dana 30 4.88, cross over steering, lockright locker with 4340 shafts, fairly new unit bearings, new ball joints, new rotors, new pads, and US Alloy outer seals.
Rear axle:
Ford 9â€, 4.88, Strange center section, full spool, 31 spline Yukon shafts, new wheel bearing/seals, new disk brakes.
Transfer case:
NP 231 with HD SYE, JE Reel long slip 1310 front shaft, 1310 CV rear, fresh joints.
Wheels/Tires:
37†Goodyear MTRs on 15†Mickey Thompson Aluminum wheels, full size matching spare on steel wheel. Tires are 85% or so.
Details:
-Full custom 6-point cage, tied to the frame in 6 locations, the rocker guards in 1 location, and also tied to the dash/cowl.
-Metal Fusion tube fenders.
-Corbeau Baja SS seats tied to the cage.
-3†Lap belts and 2†shoulder harnesses tied to the cage.
-PSC hydro assist steering box and ram. (NEW)
-Art Carr shifter.
-Wheelbase stretched to 105", leaf springs all four corners.
-BDS 2.5" YJ springs up front and stock YJ springs in the rear.
-Custom shackle reversal up front.
-15 gallon fuel cell, E2000 fuel pump.
-Cooler rack in the cargo area, cooler is included.
-LED tail lights.
-Rear traction bar mounted to removable cross member.
-Transmission has its own removable cross member.
-Nearly flat skid plate.
-Bikini top.
-New radiator, Optima red top, water pump, alternator and tune up last summer.
-M.O.R.E. "bombproof" motor mounts.
-Tranny cross member is mounted on poly bushings and hard mounted to the tranny.
-Line lock on rear brake line.
-E350 master cylinder, works great with 4 wheel brakes.
-Tube shock mounts on the front, Ford shock towers on the rear.
This is a very capable proven crawler ready to ride.
Disclaimers:
The Jeep has a lot of "character". Body has dents and scratches, tires and wheels have scratches and scuffs. The Jeep has a lot of life left in it though and everything there is solid.
Follow the link for more pictures.
http://fototime.com/inv/31B79339507F0F6
Asking $7,500
![IMG00017-20110416-1316[1].jpg](http://attachments.www.hardlinecrawlers.com/xfmg/thumbnail/0/954-b7a1f872f4abd352fdae07b594122305.jpg?1625928140)
