Sold/Expired YJ crawler

Boombox · Jul 14, 2013

Selling this for a friend. He bought this here about 10 months ago and shortly after he had to move to Texas so it has been at my house since. Since it was purchased inner beadlocks were added, led light bar was added, some oil leaks were fixed and push rods were replaced. Located in Columbia, TN
Asking $7800

tbi 350
350 trans
300 tcase
4 link rear with air shocks and leaf sprung front
60 and 14 bolt with 4.56 gears and detroits
Allied beadlock wheels with inner beadlocks added (They do not leak at all)
43 tsl stickies!

cutngut · Jul 14, 2013

Lmfao! ! I love the sticker on the side! :wtflol:

huffy67 · Jul 14, 2013

Interested in trading for this?? http://www.hardlinecrawlers.com/forums/index.php?topic=26275.0

scottlang · Jul 14, 2013

that's my old jeep, wished I had it back

drewstokes80 · Jul 15, 2013

huffy67 said:
Interested in trading for this?? http://www.hardlinecrawlers.com/forums/index.php?topic=26275.0

No trades. I had to move to Texas for a job and need the money for a house. I really wish I could keep this but where I have been stationed has zero rocks.

drewstokes80 · Jul 15, 2013

scottlang said:
that's my old jeep, wished I had it back

I bet. This thing just straight works. Now with inner and outer bead locks it doesn't burp any air.

scottlang · Jul 15, 2013

when you bought from wes it had 4340 Yukon shafts in the front and the 300 has lomax 4-1 and big outputs front and rear might help you sell it :dblthumb:

drewstokes80 · Jul 15, 2013

scottlang said:
when you bought from wes it had 4340 Yukon shafts in the front and the 300 has lomax 4-1 and big outputs front and rear might help you sell it

Yeah. Thanks for that. I have been away from this thing for so long I can't remember all the details.

1slowhatch · Jul 15, 2013

drewstokes80 said:
Yeah. Thanks for that. I have been away from this thing for so long I can't remember all the details.

Does it have a ***le? Any idea what material was used in the cage?

warpaintfab#1 · Jul 15, 2013

Interested in a Rat Rod?

JRowe · Jul 15, 2013

warpaintfab#1 said:
Interested in a Rat Rod?

drewstokes80 said:
No trades. I had to move to Texas for a job and need the money for a house.

drewstokes80 · Jul 15, 2013

1slowhatch said:
Does it have a ***le? Any idea what material was used in the cage?

No ***le for it. I just got a bill of sale. I bet Scott knows what the cage is made of hopefully he will chime in. I literally got a job in Texas less than 24 hours after I bought this thing. So I had very little time to do anything with it. I know the cage looks to be very strong. It has one hell of a Teflon coated skid plate on the bottom. And the tires are sticky as hell. This thing has been wheeled hard. Any weak points have been found and upgraded. It will crawl up just about any trails you can find and doesn't cost $30,000 like most rigs that will be going up the same stuff. Does it have dents and scratches. Yes. But that is because this thing goes through he'll and comes out of it like a nice Sunday drive. Oh yeah, the light is bright as hell! If Scott doesn't chime in I will see what I can find out about the cage.

scottlang · Jul 16, 2013

from what I can remember it was dom

drewstokes80 · Jul 16, 2013

scottlang said:
from what I can remember it was dom

Thanks for the help.

Boombox · Jul 16, 2013

WILL TAKE $1500 OFF PRICE WITHOUT LIGHT BAR AND SWAP THE WHEELS AND TIRES WITH 42 TN CUT TSL'S AND WILL INCLUDE NEW OUTER RINGS WITH DESIGN OF YOUR CHOICE.
HERE IS A PICTURE OF THE WHEELS AND TIRES THAT WOULD GO WITH IT.