• Help Support Hardline Crawlers :

For Sale YJ on Tons

money_pit_yj

Well-Known Member
Joined
Oct 28, 2013
Messages
2,960
Location
Collierville, Tn
It is a nice budget 4 seater. It is not real fancy but it’s a solid rig as is or a good start for a fancier rig. It sits all the time so I’m going to sell it.

454 Vortec TH350 with Sidewinder shifter
60 Front with Yukon locker stock shafts
205 Single Stick
14 Bolt rear welded
3 Link front with coils
Hydraulic steering with single ended TSC ram
Leaf spring rear
42” TSLs all hold air but one leaks down over 6 weeks
RCI fuel Cell
Corbeau seats front and rear
I bought it 90% done and finished it. The wiring and stuff was done well. All the fluids run through coolers. Never gets hot and runs all weekend on one tank.
Collierville, TN
731-780-7212
$8500 would look at trading on a 4 seat SXS and adding cash
 

Attachments

  • 49266D8E-F42B-41D6-82C6-311E0E8126C9.jpeg
    49266D8E-F42B-41D6-82C6-311E0E8126C9.jpeg
    315 KB · Views: 168
  • 4477AB47-CA0A-42B1-A0B6-48E4DCD7D84B.jpeg
    4477AB47-CA0A-42B1-A0B6-48E4DCD7D84B.jpeg
    292.3 KB · Views: 165
  • 72C787B2-4A23-43F4-B2F8-F606EF628D62.jpeg
    72C787B2-4A23-43F4-B2F8-F606EF628D62.jpeg
    363.2 KB · Views: 173
  • B2A2CDF5-B3DD-4FC8-A95A-4EF06E25C321.jpeg
    B2A2CDF5-B3DD-4FC8-A95A-4EF06E25C321.jpeg
    521.4 KB · Views: 193
  • 52B7E055-AEDD-4358-9505-191E31CAFACE.jpeg
    52B7E055-AEDD-4358-9505-191E31CAFACE.jpeg
    401.1 KB · Views: 192
  • 7BC2A854-2A57-4A35-8DA7-07F03AEAEF2F.jpeg
    7BC2A854-2A57-4A35-8DA7-07F03AEAEF2F.jpeg
    441.3 KB · Views: 188

JeffH454

Well-Known Member
Joined
Aug 28, 2013
Messages
396
Hey , you know I'd have to step into your fursail add as I've always thought it was a good budget rig with a nice parts list. Can ya get a width and height for trailer and storage building compatibility..it looks like DRW diffs so I'm betting its pretty wide. Did you ever get the title stuff worked out, I know its not a street rig but a couple places I ride require a little road time between acreage. Is the wheelbase stretched..if it is do you think a doubler would fit?
 

money_pit_yj

Well-Known Member
Joined
Oct 28, 2013
Messages
2,960
Location
Collierville, Tn
It is right at 93” wide in the front. That would obviously go down if you put SRW hubs or had these turned. As far as height, it gets in my standard 8’ garage easily but I will measure when I get home.

I’ve never looked at the title I have to see if the VINs match but I have some sort of title.

A doubler would require moving the rear axle back. The driveshaft angle now is the only issue with the rig. If I were keeping it, I would 4link the rear and move the axle way back. You may could get a doubler in there and make it work.
 

JeffH454

Well-Known Member
Joined
Aug 28, 2013
Messages
396
The height is the most important for me because my barn has low door header clearance , I just asked about a doubler because I’ve got one laying in my building from my sons rig but I figured the wheelbase would make that difficult.
 

money_pit_yj

Well-Known Member
Joined
Oct 28, 2013
Messages
2,960
Location
Collierville, Tn
If I was closer to somewhere to ride I’d have kept it. It sat for 2 years and wasn’t cranked for a year. It will be used regularly now. Already has 44” Boggers on it.
 

Latest posts

Top