Sold/Expired YOTA TRUGGY-4.3-60's-linked-42's

[backyard built]

Moving on again, 3rd rig in last few years but young kid and new house, should say it all.... Anyway here is the break down with full documentation of pics avail. It has only been out a hand full of times-- It flat works as well as my buggies that I put twice as much money into. TG-Yukon and Fox helped out on this build-- All parts are top notch and brand new..

:Full custom frame out of 2x4 box, made so entire driveline is recessed and cage ties into it. Originally built for leafs- I left the hangers up front for now. Currently all 4-linked
: Full cage built around the cab- works well-looks pretty good- lots of changing around to get like this..
:4.3 chevy vortec on propane-new intake-distributer-wires-exhaust-alumn radiator , brand new freshly built 700R4 with reverse manual valve body and sprint car shifter. Dual yotas with all new 23 spline throughout- all cromo TG input and outputs with 4.7 in the rear, strong as a Yota case can be.. All new...
:Front d-60 complete rebuild with brand new Yukon 35 spline cromo inner and outers with yukon super joints,yukon grizzly locker,4.10, TG lock outs- Again 4 trips on all of this-
:Full hydro-double ended ram-cheryl lynn column-field fittings- custom steering arms,custom diff cover, fully trussed.
:Rear d-60 again brand new yukon spool w/4.10,and new cromo shafts,new disc brake conversion,fully trussed.
:Four linked front and rear- all lowers 1 1/4 new heims,all with 3/4 meaty grade 8
:links 2in 2.50 wall-4 of the uppers are 7/8 heims. All with mis alignments and bought meaty brackets.. No cut out mild steel
:Front has brand spanking new 14in remote resi 2.0 Fox coilovers--Rear has 16in Fox 2.0 airs.
:Has recentered H1's with rock rings,again recently done
:42 in Iroks about 60%- just getting to where they bite- they all hold air
:Front 9k winch with brand new synthetic line(line still on bench) new fairlead- rear new ATV winch 2500lb needs to be finish wired
:New LED head lights,
:Brand new 1/2in UHMW boards for whole underside haven't cut and fit just yet.
WB-116-- width 85-- belly height 22in

Overall truck can hit trail today, still have parts on the bench I haven't had time to get in-more gauges-more lights-radio-speakers-trans tunnel
LOT"S of these pics are before it was finished-- I will try a get some up to date ones-- These are what I have on this computer..

It's sits,runs and performs good as is,needs the last 10% completed to be a hell of a rig-ran out of time and just started wheelin it-- Needs some final touches to be 100%

Call with questions--In VA-- $10,500-- Thats a steal for what's in it.. Only possible trade is a 70's FJ 40- mildly built rig that is streetable
804-441-0146 Brian If no one comes through I will finish it and the price goes up a grand..

http://youtu.be/65okx4e9SDA

http://[http://img138.imageshack.us/img138/1081/xf5i.jpg/img]
[img]http://img826.imageshack.us/img826/7127/5mvx.jpg

 

[backyard built]

Few more pics, have tons of build pics-- You tube shakey vid of current walkaround condition..

 

[backyard built]

Think a deal has been struck, waiting till the weekend to materialize..

 

[G2]

Would like to see some more pics. If this isn't sold.

 

[backyard built]

Few from this weekend, It wheeled a 3 day event hard with not a wrench turned all weekend.. It does great,just could use some final touches..

BRAND NEW trans installed last week.

http://youtu.be/mO_dtwPftTo short vid of it crawling

 

[backyard built]

Would like to see some more pics. If this isn't sold.

What of? build pics or current? not hiding anything--solid rig.. And it's still avail-- guy has seemed to disappear once a deposit was needed..

 

[SomewhiteGuy]

Seen this over the weekend, you guys passed our camp in 6 heading back to watch the mud bog. Good looking rig.

 

[backyard built]

Solid rig for someone.. There are yota's on here with 22re yota axles and 37 for the same price! Make offers,

 

[TacomaJD]

I'm curious how it sounds running through that carbon fiber Two Brothers crotch rocket pipe

No ****, I had seriously considered putting an old Yoshimura can that I had shortened on one of my old Toyotas back in the day :****:

Had those same Two Brothers bolt-on cans on my old ZX10R


Oh and I really dig your rig! Good luck with the sale!

 

[Burttyler]

wish i had the coin it would be mine :****:

 

[backyard built]

Ha, the ole pipe was kind of a joke, but it would have worked!! It now has a straight y-pipe to glass pack turn down.. Sounds decent,runs excellent- never hiccups.

Starting to entertain the thought of a cheaper rig to hold me until the new house is done and I can build another.. Burttyler-- I see yours for sale on here as well-may be interested in a trade +cash.. hit me back if interested

 

[Burttyler]

i would love to trade!!!!!!!!! but i have a new baby boy on the way that will be here in a week or sooner so all cash is gone right now

 

[backyard built]

I'm basically in the same spot, 1 lil one at home another in the oven... Cash is king- offers?