paradisepwoffrd
Well-Known Member
Some things have changed and I need to part with my buggy project.
95 tracker, no title
-1.6l 8v, 40mm harley carb, elec fuel pump, MSD reg
-5spd, stock tcase twin stick and 2lo
-Internal cage, tubed front. 1.5" 0.120 with some 0.95 bracing. Backhalf and Boatside started.
-3link front, 4 link rear. 250 wall lowers, 120 uppers. Mix of 1.25 heims, 7/8 heims, cartridge joints.
-M8000 winch with synth rope
-Fox 2.0x14 air shocks all around
-Full hydro setup w/ orbital & SE ram. Tc pump.
-AC conv to oba.
-609 front. Lp 9" 3rd, 6.50 gears, 31 spline spool, pinion gaurd. Chromo 31 spline inners, spicer joints, stock outers. Ford 60 knuckles. Hubs converted to 5x5.5. F150 rotors. Brackets for gm calipers. Slugs. high steer arms with knuckle tie-in.
-Stock 9" rear. Stock 3rd.
-42" iroks (75%) on 15" steel wheels.
Extra parts:
-Sami case, twin stick, 4.9 gears
-9" 6.5 gears, spool, pinion gaurd, brake brackets for rear.
-RCI 2161a cell, artec mount
-Prp wide susp seats
-T25 turbo, fuel pump, reg, oil parts, manifold.
-Spare 42" irok.
What it needs:
Finish tubing the rear & boatside.
Finish building the rear axle.
Plumb steering.
Finish brakes.
Finalize fuel system.
Build mount for sami case.
Driveshafts.
Also have a 2.0l tracker that can be included for full asking price.
$10k.
Located in Newton NC.
Possibly open to partial trades, but need mostly cash. Willing to part if someone wants the chassis or axles first.
Let me know if you want any other pictures.
95 tracker, no title
-1.6l 8v, 40mm harley carb, elec fuel pump, MSD reg
-5spd, stock tcase twin stick and 2lo
-Internal cage, tubed front. 1.5" 0.120 with some 0.95 bracing. Backhalf and Boatside started.
-3link front, 4 link rear. 250 wall lowers, 120 uppers. Mix of 1.25 heims, 7/8 heims, cartridge joints.
-M8000 winch with synth rope
-Fox 2.0x14 air shocks all around
-Full hydro setup w/ orbital & SE ram. Tc pump.
-AC conv to oba.
-609 front. Lp 9" 3rd, 6.50 gears, 31 spline spool, pinion gaurd. Chromo 31 spline inners, spicer joints, stock outers. Ford 60 knuckles. Hubs converted to 5x5.5. F150 rotors. Brackets for gm calipers. Slugs. high steer arms with knuckle tie-in.
-Stock 9" rear. Stock 3rd.
-42" iroks (75%) on 15" steel wheels.
Extra parts:
-Sami case, twin stick, 4.9 gears
-9" 6.5 gears, spool, pinion gaurd, brake brackets for rear.
-RCI 2161a cell, artec mount
-Prp wide susp seats
-T25 turbo, fuel pump, reg, oil parts, manifold.
-Spare 42" irok.
What it needs:
Finish tubing the rear & boatside.
Finish building the rear axle.
Plumb steering.
Finish brakes.
Finalize fuel system.
Build mount for sami case.
Driveshafts.
Also have a 2.0l tracker that can be included for full asking price.
$10k.
Located in Newton NC.
Possibly open to partial trades, but need mostly cash. Willing to part if someone wants the chassis or axles first.
Let me know if you want any other pictures.
