EXO CAGE VS INTERNAL CAGE on 1989 4runner

[jprcrpr94]

I this the shop your talking about

http://thefabshop.com/

I've talked with the guys at The Fab Shop. They don't like to do cages, they're not cost effective to them. Plus they don't wanna deal with the liability.

 

[CHOP SHOP]

I saw that one. WAY too much tube for my tastes. I think I'm still leaning towards internal. My body's still pretty straight, but I'm sure that's gonna change real quick though after a couple of runs with my driving style!:redneck:

I talked with the owner and builder. He said he payed $4,000 for the cage and bumpers.:eeek:

 

[jprcrpr94]

I talked with the owner and builder. He said he payed $4,000 for the cage and bumpers.:eeek:

:ANYWORD:There's one born every day, right?:ANYWORD:

 

[CHOP SHOP]

:ANYWORD:There's one born every day, right?:ANYWORD:

Did you see the red GEO Tracker inside that was real nice? Guesse how much? Same builder.:corn:

 

[jprcrpr94]

Did you see the red GEO Tracker inside that was real nice? Guesse how much? Same builder.:corn:

Who was the builder? Are his welds gold plated or something?:eeek:

 

[zukkev]

Have you checked out Kyles Silver Runner on our site Kevin???

 

[jprcrpr94]

Have you checked out Kyles Silver Runner on our site Kevin???

No, do you have a link?

 

[Jaydog]

I talked with the owner and builder. He said he payed $4,000 for the cage and bumpers.:eeek:

Supply and demand, if they'll pay it, I'll take it

 

[jprcrpr94]

Wow, I'm a dumbass! I see it in your sig now!:haha:

 

[jprcrpr94]

Have you checked out Kyles Silver Runner on our site Kevin???

I just checked it out, and that ones got too much tube for me also. I think my picky ass is gonna have to go with an internal, that's the only way I'll be happy!:redneck:

 

[CHOP SHOP]

Who was the builder? Are his welds gold plated or something?:eeek:

The guy told me he was into it 20Gs! For the cage, bumpers, SAS, swap toy axles. No double, or motor swap or nig items.

I asked him if it would wipe his ass? He said, "I hope so".:beer:

 

[karhart77]

http://nw-wheelers.com/forum/showthread.php?t=35647

 

[TheMasterbater]

Taylor Bilt Fab is Ethan, he does the nicest exos around. Great design for an exo, and very clean looking. he is on the board as TB-F

 

[Ed Bister]

Taylor Bilt Fab is Ethan, he does the nicest exos around. Great design for an exo, and very clean looking. he is on the board as TB-F

Thanks i got his email and contact info!!

Ethan Taylor (Fabricator):
Cell: (425) 971-1264
[email protected]
http://taylorbiltfab.com/ContactUs.html

 

[HotRodJosh]

As far as not f--king your body up does a rig covered with tube look any better than smashed up body parts?

Haha....I've seen plenty of rigs with exo's cages covering beatup bodies....:rb:

When it comes to cage my 4Runner, it will be internal.:awesomework: Exo's are UGLY......
:beer:

 

[crash2]

Like buying a new couch and putting plastic on it

 

[Bunk1]

Like buying a new couch and putting plastic on it

Quote worthy

 

[TooRisky]

Unless you have very very deep pockets and never expect to get your investment back ok Exo...

If you are worried about the condition of your vehical, probbly best to go with a shiney bolt on roll bar in the bed and keep with cruisin the malls, impressin the gals, and pissin off uneducated security gaurds.

 

[Ed Bister]

I talked with the owner and builder. He said he payed $4,000 for the cage and bumpers.:eeek:

Hello Ed.
I absolutley do 4runners, strange tube aplications are my specialty. I would guestimate a cage/f/r bumper/slider combo at around $2200 based off using my standard 1 1/2" x .120 dom tube, larger tube sizes can be done but it will raise the price slightly due to materials costing more. Also would be slightly cheaper without rear bumper, about $200 less but they complete the tube look vwey nicely. Feel free to give me a call, my # is 425 971-1264
Thanks, Ethan Taylor. Taylorbilt Fabrication.

 

[jprcrpr94]

2200 sounds reasonable. For $4000 it better give me a blowjob every time I walk by it!