Project samurai repair and replace

[Sandtrap1986]

Thinking this thing is gonna be 4 linked as I put it back together

 

[zukkev]

That's how Gavin's went....see ya in a couple yrs! :fawkdancesmiley:
:redneck:

 

[Sandtrap1986]

Haha I said might and it would be a little ways off gotta get my new place first

 

[Sandtrap1986]

If I had a drawing for some plates to run my toy axles I would be on my way to leafs in no time

 

[Poohbair]

Are you taking out the stock axles and putting Toy axles in??

 

[Sandtrap1986]

Are you taking out the stock axles and putting Toy axles in??

Yup most likely don't want to cut them down till I got the yota plates and axles done

 

[Poohbair]

I am picking up a 91 with a bad rear end ... Need a replacement

I am also on my phone and I think I accidentally "reported" your prior post :awesomework::hi:

 

[Sandtrap1986]

You don't want mine it's got a lunch box locker that broke so I ghetto welded it together and some how it has held for this long

 

[Poohbair]

You don't want mine it's got a lunch box locker that broke so I ghetto welded it together and some how it has held for this long

I'm in no hurry I will gather a few parts at a time!!

 

[crash2]

Get r done--i wanna drag ya thru reiter :redneck:

 

[skinny_pedal]

That's how Gavin's went....see ya in a couple yrs! :fawkdancesmiley:
:redneck:

:flipoff:

 

[Sandtrap1986]

Get r done--i wanna drag ya thru reiter :redneck:

Haha I'm trying for now I'm just gonna throw some yota axles under it and different leafs see how I feel about that and go from there

 

[zukkev]

If I had a drawing for some plates to run my toy axles I would be on my way to leafs in no time

:booo:
Actually looked for that photo, and It got lost with my last computer crash. Let me see if I can find it again on the 'net...

 

[Sandtrap1986]

View attachment 57651View attachment 57652View attachment 57653

Blew the fuel Back and Dropped the tank today and replaced the inline filter both were full of chips and mud.

 

[ToyZuki]

:booo:
Actually looked for that photo, and It got lost with my last computer crash. Let me see if I can find it again on the 'net...

I just text it to you! To lazy to upload!

 

[Sandtrap1986]

View attachment 57655View attachment 57656
Finished buttoning up the cancers patch think I got the hang of this sheet metal work

 

[Sandtrap1986]

View attachment 57657View attachment 57658

After I removed the stock broken seat noticed a rip so while I had the welder on and some extra metal figured I might as well fix the hole

 

[Sandtrap1986]

View attachment 57659

Finally got the fold and tumble seat that I got from mark m ages ago in and tacked down the mount

 

[t1h5ta3]

If I had a drawing for some plates to run my toy axles I would be on my way to leafs in no time

yj spring plate pdf

https://drive.google.com/file/d/0B0FPNWZMxOdDQVhUdkx4X0daT2s/view?usp=sharing

parts manual pdf
https://drive.google.com/file/d/0B0FPNWZMxOdDYnhUVWVoT2NJU0U/view?usp=sharing

haynes manual pdf
https://drive.google.com/file/d/0B0FPNWZMxOdDWEhvQ3VGWGsyZ3c/view?usp=sharing

factory manual pt 1/3
https://drive.google.com/file/d/0B0FPNWZMxOdDOFBnR21vczFHaTg/view?usp=sharing

factory pt 2/3
https://drive.google.com/file/d/0B0FPNWZMxOdDdXltX0tvd1p1NXc/view?usp=sharing

factory 3/3
https://drive.google.com/file/d/0B0FPNWZMxOdDVlZxUVpzSDJSZUU/view?usp=sharing

i also have a color wireing diagram for a 88 some where... ill share it when i find it.

 

[Sandtrap1986]

View attachment 57693
Both seats in and tacked down and repainted mounts

View attachment 57694

Putting this in for the battery after I de rust it

View attachment 57695View attachment 57696View attachment 57697

Did some rust abatement on the new clip and on the kick panels