have an nv3550 out of 2004 wrangler.low miles around 70k.came out of my jeep i built when going to v8 set up.im in fl.321-229-2320 $600.direct replacement for ax-15 with no modifications at all.also have a b&m short throw shifter can add as well.
i have a complete 4 inch procomp/springs front and rear/shocks front and rear/pitman arm/front and rear lower control arms/track bar/rear track bar bracket.kit is pretty clean.came off my customers jeep that went back to the bank.kit is 1K new.$500 plus shipping im in fl.321-229-2320.joe.
im in fl with a class c around 25-26 foot sleeps 4. its a 1997 I believe with some nice upgrades.no carpet it has stick down tiles/bunk over driver section has real wood cabinets with a 40 inch flat screen/stove/2 sinks/bathroom/shower/microwave/dash ac is ice cold/over head ac ice cold/no leaks...
I have one from my yj in my avatar.it is like new as I am building a buggy chassis now.bought it from wizard cooling 2 one inch row with inlet and outlet on passenger side.with steam port just like factory radiator should have.its super clean and had very little use.$275 but im in fl at 34736...
scs straight drive case is the smallest out there.i already done my home work about 2800 for case with yokes.all dimensions are on their website.its the case for sled pulling.
yeah price is high but so is the quality.im building a mega cab and am needing the 8 lug hubs and wheel brakes and the prices are steep.$500 plus for each hub/$675 for each caliper and rotor/$1200 for each set of 4:90 gear ratios.total of almost 10k to do a front and rear rock.but its high...
spoke with randy on this awhile back and the older design was due to not having the tooling to cut the internal splines for the slug (how the 60 hub is machined) also the older design did not permit use of the 2 inch outers at that time.but that version was his first design from a loooong time...
im in florida and have a perfect factory 78-79 steering wheel/perfect sand blasted frame with shackle reversal kit that has been coated in por 15/original grill and dash panel/front and rear axles as well that have been gone through with new bearings seals and u joints/ and some other misc small...