Recent content by Ni4x4

  1. Ni4x4

    GM front 60 locker?

    My buggy weighs about 3200-3500 lbs, right now about 300hp at the fly wheel but am looking to put a supercharger and water meth injection this summer..... I run 38.5x11" boggers and cut 44" Gumbo's. I do a mix of wheeling styles from a bit of muddin, technical crawling with doubler or bouncing...
  2. Ni4x4

    GM front 60 locker?

    I gotta change carriers to re gear, options are all around the same price; Detroit, Grizzly, or an OEM style carrier and a lunch box like a spartan or lockright? Which one seems to hold up better? Thanks, Sam
  3. Ni4x4

    Made in Canada

    No oppinion on wether or not a 40 splined, FF 9" will hold up? Sam
  4. Ni4x4

    Made in Canada

    My cousin gave me these 44" gumbo monster mudders last fall so I recently got some used beadlocks for them, cut them up and put them on my buggy. When I put the gears in the rear end I noticed the splines on the shafts were twisted a fair bit and was a matter of time till they let go. Although...
  5. Ni4x4

    Made in Canada

    Im in northern ontario, canada. it took a while for the snow to get here, not as much as in past years but enough to give me a hard time. I didn't get any video but a buddy on wide Irocs tried and barely made it outta the creek at the bottom. I'm going to try it again when it warms up a...
  6. Ni4x4

    Made in Canada

    I posted the above vids today but it didn't bump up, still said feb 7 was last post ???
  7. Ni4x4

    Made in Canada

    I went out to play in the snow yesterday at one of our more technical trails yesterday. I only went to climb the hill at the north end of the trail. It is 1/2 comparable to cable hill, but apparently 10 times worse in 2-3' of snow. blueberry hill in the snow blueberry hill in the snow2...
  8. Ni4x4

    Grooving TSLs

    I had a buddy from a tire shop tell me about those groovers so I took a cheap hole saw.and sharpened it up like a knife blade on the bench grinder to hack into my XZL's. It worked great and fast as it takes oit wide strips and will cut for as.long a run as you can control it for. It was kinda...
  9. Ni4x4

    Made in Canada

    The front springs are stock XJ. they are really good so far, dont unload really hard like the ribicon ones i had at first. The cantilever is working well also, Im getting 18" travel from an 8" shock. I was concerned there wouldnt be enough dampening but even at 55ish mph lots of control.
  10. Ni4x4

    Made in Canada

    Ive been ironing some bugs outta this thing for a couple weeks now and I am pretty happy with it. Im excited for spring, there aren't a lot of available trails up here in the winter with all of the snowmobile federation trails. sorry about the crappy quality of the videos, my phone doesn't...
  11. Ni4x4

    Made in Canada

  12. Ni4x4

    B4000

    http://pirate4x4.com/forum/showthread.php?t=961574 it turned out pretty good. Sam
  13. Ni4x4

    Sold/Expired 47 LTBS ON BLACK STEEL WHEELS

    will you ship to ontario canada?
  14. Ni4x4

    Tim Cameron's new buggy "Hell Raiser"

    Well said sir! I read through this whole thread and "think" that I have pieced together the following.... Tim was aiming to sell his axles, sold the buggy as a roller instead, assuming he kept the engine trans and t-case?,,, and a new chassis is in the works at this time.......? can someone...
  15. Ni4x4

    BTF "Behemoth" Flexjoints: 4.5" joints

    I live in a mining town (Sudbury, Ontario Canada) and have worked under ground as well as built and maintain mining trucks and equipment and I can tell you no matter how big and strong you think you are building these things it isn't enough. I have seen frames that are semi boxed and heavily...
See more

Latest posts

Back
Top