Land crusher built

Land crusher build

This is my buddy Jason Gowin's land crusher. It already has mass cool stuff in it. but were redoing the cage and adding hydro steering and lowering the whole rig 10" from 88" to 78" and fuel injection then 4 link and coil overs for the rear. all in about 2 months so well heres the start

here it is when we first brought it in my shop, we had to deflate the **** out of the tire's just to get it in my shop.
View attachment 25298

then start removing the body and cage
View attachment 25299

View attachment 25300
OK kinda forgot the camera for a little bit but here its coming back together, with it now 8" lower so far and the only body were going to run is the hood, cowl, and narrowed up grill.
View attachment 25301

View attachment 25302

more pic's

here is the new man exhaust 3.5"
View attachment 25303

all new from scratch dash.
View attachment 25304
here's two pic's of all the new front end:awesomework:
View attachment 25305
the coil looks funny in these pic's because lack of a pan hard bar
View attachment 25306

but more pic's to come soon:awesomework: :beer: :beer:

The cage and stinger look awsome guys! Nice work. This thing was bad ass before the make over. Now it should REALLY get him into trouble spots. Did you guys get any pics of this thing on the outlet mall in it's previous form? First Cruiser on the OM? How much longer till it's done?

Wish I lived closer to you guys so I could hang and watch the build. Maybe my yota would take on a new look with some actualy roll protection built in.

Land Crusher is a perfect name Gowin :awesomework: fits your driving style for sure

The front driveline is a Dana 60 front axle tube

:awesomework: :awesomework: Nice build !!!!!! keep going!!!!:awesomework: :beer: :beer:

Hell yeah Jason...Cant wait to wheel with ya'll again...hit me up if ya need any machining or material hook-ups..

Radical!!!:bananadance:

So here's some pic's from tonight, were doin the floor's

here's gowin firing up the welder.
View attachment 25369

View attachment 25370

The new fender sides.
View attachment 25371

And here we have covered up the man exhaust:awesomework:
View attachment 25372

OK BEER THIRDY:beer: :beer: :beer:

Tomorrow more tube for the rear, drivers and passengers openings as well :awesomework:

Darby said:

The cage and stinger look awsome guys! Nice work. This thing was bad ass before the make over. Now it should REALLY get him into trouble spots. Did you guys get any pics of this thing on the outlet mall in it's previous form? First Cruiser on the OM? How much longer till it's done?

Wish I lived closer to you guys so I could hang and watch the build. Maybe my yota would take on a new look with some actualy roll protection built in.

Land Crusher is a perfect name Gowin :awesomework: fits your driving style for sure

Click to expand...

Hey darb when ya going to bring your toyota down to the shop??

I'll have some room for ya soon:awesomework:

pumpy said:

Hey darb when ya going to bring your toyota down to the shop to loose the body and truggy it up??

I'll have some room for ya soon:awesomework:

Click to expand...

Fixed

Floor pans

The floors turned out bad-ass! Glad to see you guys didn't stop after I left. I figured you guys would lose all motivation without me.

I know Its a miracle:redneck:

Wholly ****! That's badass......I take it this has got a HOT small block it it?

I'm Jason's old neighbor......so what happened with his black 'Yota?

HotRodJosh said:

Wholly ****! That's badass......I take it this has got a HOT small block it it?

I'm Jason's old neighbor......so what happened with his black 'Yota?

Click to expand...

Ya not exactly, It's a BB 521 stroker :masturbanana[1]: currently getting EFI as I type. and the old black toyota got scraped and crushed.


P.S. Jason just joined the board but no post's yet look for him under GOWINATOR

Haha...should have known a rig that big would be runnin' BBC power. He's got a heavy right foot.....

That ain't no lie:redneck:

P.S. it's a stroked 460 ford

WTF????? BBF???? 1st the Ford tow rig.....now this????
When's a Ford engine goin' in the Camaro?
Hahahahaha...(sorry Jason)

Pretty bad ass rig. To bad it's not a bronco :fawkdancesmiley:
Just thought I'd drop in and say howdy.:hi:

Pumpy, we met up at Reiter on the 1st, nice bronco by the way. I was wondering what the wheelbase & width dimensions of the two rigs were? Nice work :awesomework: