Triple stick transfercase......

Sandtrap1986 · Mar 17, 2013

http://radesignsproducts.com/Triple_Sticks.html

anyone seen this or have one looks pretty cool. would be nice to have them all in the same spot and would make mounting my auto shifter alot easier

War-Jeeper · Mar 17, 2013

Seen a handful of people with these kind of a cool idea

Central4runneR · Mar 17, 2013

i have been kinda lookin into one of those as well it would be nice to have them in the same place and i would be able to put the switches for my rear window back in the stock location as to just havin them lay on the floor like they are now

lethe · Mar 17, 2013

Thats a neat idea. I haven't seen those before.

ain'tstuckjustresting · Mar 18, 2013

I have them in my truck with the 4.3/AT. It was mainly so I could mount the Art Carr shifter on top of the 2nd case where it was easy to reach instead of way up over the trans. Rory was great to buy from and the kit is really good quality.

Sandtrap1986 · Mar 18, 2013

ain'tstuckjustresting said:
I have them in my truck with the 4.3/AT. It was mainly so I could mount the Art Carr shifter on top of the 2nd case where it was easy to reach instead of way up over the trans. Rory was great to buy from and the kit is really good quality.

That is the exact reason I was looking at it since I have the same setup.....anything different u have to do to the dual cases ...that i would need to drop them to install it?

GRW · Mar 18, 2013

I have them also but I installed them so I did not have to loose any of my console. At the time (not sure if it's changed) he did not make one for my truck so I modified the one he had to work for my application.

http://www.supermotors.net/getfile/950706/fullsize/new-shifter-through1.jpg

Boonie Buster · Mar 18, 2013

I was looking at those as well, I like this one better because the "levers" are mounted below the axis along the side of the case, should be able to tuck the cases up further to the belly this way...

http://www.davezoffroadperformance.com/store/triple-shifter.html

KarlVP · Mar 18, 2013

Meh, I just bought an atlas 4 speed and called it a day. :flipoff:

ain'tstuckjustresting · Mar 18, 2013

Sandtrap1986 said:
That is the exact reason I was looking at it since I have the same setup.....anything different u have to do to the dual cases ...that i would need to drop them to install it?

I hacked my tunnel because I was going for a near flat belly but Rory's later design fits better than the early ones inside a console. The only thing you need to do for install is remove the pill in the rear case just like any other twin stick kit. You usually have to lower the cases to do it if it isn't already out.

Sandtrap1986 · Mar 19, 2013

ain'tstuckjustresting said:
I hacked my tunnel because I was going for a near flat belly but Rory's later design fits better than the early ones inside a console. The only thing you need to do for install is remove the pill in the rear case just like any other twin stick kit. You usually have to lower the cases to do it if it isn't already out.

well i will probably be replacing the tranny soon anyhow so i guess i will just do it all at once

Avanteone · Mar 19, 2013

KarlVP said:
Meh, I just bought an atlas 4 speed and called it a day. :flipoff:

:haha:

2pwrlftrs4u · Mar 19, 2013

KarlVP said:
Meh, I just bought an atlas 4 speed and called it a day. :flipoff:

stickers or it didnt happen :fawkdancesmiley:

Sandtrap1986 · Jul 7, 2013

Hmm which one to order.......

altron32 · Jul 7, 2013

i would go with RAdesigns, daveoffroad is slow right now, family problems. i plan on getting one soon for my dual setup, i like my bench seat

Flat-Bed_3rd_Gen · Jul 24, 2013

Boonie Buster said:
I was looking at those as well, I like this one better because the "levers" are mounted below the axis along the side of the case, should be able to tuck the cases up further to the belly this way...

http://www.davezoffroadperformance.com/store/triple-shifter.html

i have these on a third gen with a 3.0l and a clocked t-case adapter. the only problem i have is i cannot not get my transmission to shift into R because it gets stuck in the t-case shifters. i am thinking if i get a second gen shifter that is shorter it might fix my problem i can take pictures this weekend if anyone is interested

Boonie Buster · Jul 24, 2013

Flat-Bed_3rd_Gen said:
i have these on a third gen with a 3.0l and a clocked t-case adapter. the only problem i have is i cannot not get my transmission to shift into R because it gets stuck in the t-case shifters. i am thinking if i get a second gen shifter that is shorter it might fix my problem i can take pictures this weekend if anyone is interested

Yes please.

Zukzillah · Jul 24, 2013

RADesigns.

Installed in my zuk. Haven't actually used it yet but it was the only way to fit an auto shifter. RADesigns makes those too, but I made my own.

View attachment 54924

ain'tstuckjustresting · Jul 24, 2013

****, I just put mine all back together last weekend. I should have taken pics with the tunnel off. Mines about 2" from flat belly with the RAdesigns.

zukkev · Jul 25, 2013

ain'tstuckjustresting said:
****, I just put mine all back together last weekend. I should have taken pics with the tunnel off. Mines about 2" from flat belly with the RAdesigns.

:nutkick: :cheer:

rod: