DIY beadlocks??

I'd say when ya bend em it's about 3/4" ... Once ya tighten the bolts everything is evenly tightened as far as bolts go... Mine haven't lost any air so I know it works good... Just can't wait to thrash em!

huff75 said:

Soooo there is no issue with one of the tabs bending at the wrong place and giving an uneven height for anti coning?? What's the best way to bend?

Click to expand...

x10 for TMI. https://totalmetalinnovations.com/

I used 2 crescent wrenches on each end, no problems. I started with one big crescent in the middle, but liked using 2 better. Order your design, have them in a week and half.

84runners said:

x10 for TMI. https://totalmetalinnovations.com/

I used 2 crescent wrenches on each end, no problems. I started with one big crescent in the middle, but liked using 2 better. Order your design, have them in a week and half.

Click to expand...

I loved my tmi beadlocks. Just wish on that set I did the 1/4" upgrade. I need to order another set.

tommy450r said:

That's what I need to know so I can do something like em on mine this week

Click to expand...

3/4" should work.

I got the beadlocks in the mail today that I bought from adamF on here they fit great an we're very easy to weld up...

Gonna mount the tires up tomorrow an get me some air soft bbs to balance them

Just passing this on. www.allensfasteners.com. where I buy my bolts from. Super cheap!

tommy450r said:

I got the beadlocks in the mail today that I bought from adamF on here they fit great an we're very easy to weld up...

Gonna mount the tires up tomorrow an get me some air soft bbs to balance them

Click to expand...

Got em all done powder coated the rings an mounted the tires up adamF has a good product!!!!!!

I ended up using a good coat of bead sealer on the inner bead. An put some silicone down on the outer and I put 10 ounces of air soft bbs in each tire they do good on my jeep running down the road

Glad it worked out, and you liked them. Nothing better than a quality product at a fair price.