Nitro Excalibur joints question

May be a dumb question but hey never know. I have these joints in my front axles and while doing some work today noticed that one of the caps on the joint was missing. Does anyone know if I can buy just the caps and clips or do I have to replace the whole joint. Hate to spend $200 for just needing a cap. Thanks for the help

Looks like they do sell a cap kit. This is for Dana 30 and 44 but I bet you can get them for all.
http://www.justdifferentials.com/NP760X-EXC-KIT-p/np760x-exc-kit.htm

Awesome. I went to their site but didnt see that. Will be on the phone with them tomorrow. Thanks for the help..

East coast gear supply is a big Nitro dealer, good people and fast shipping, they are in NC

I've heard you can put stock needle bearing caps on super joints or these nitros but I don't know , I have a set of these nitros and wanna run them on the street and thought about swapping em back out or trying needle bearing caps

Rockwells607 said:

I've heard you can put stock needle bearing caps on super joints or these nitros but I don't know , I have a set of these nitros and wanna run them on the street and thought about swapping em back out or trying needle bearing caps

Click to expand...

I just replaced the caps on my Yukon Dana 60 Superjoint yesterday. I don't think you can put a needle bearing cap on as the cross is larger.

zukimaster said:

East coast gear supply is a big Nitro dealer, good people and fast shipping, they are in NC

Click to expand...

Ordered a whole kit today. I got four caps coming but only need the one. If they are in before next weekend I will have them at Hawk pride if anyone needs an extra cap.

semperfi1919 said:

Ordered a whole kit today. I got four caps coming but only need the one. If they are in before next weekend I will have them at Hawk pride if anyone needs an extra cap.

Click to expand...

Why not rebuild the whole joint? Others could be damaged but not visible.