Why me??? Advice needed, cracked transmission housing. WTF.

Beerj · May 4, 2015

What's that puddle under your jeep in the pic?

Just kidding man, glad to see you got her situated.

FlatlandFSJ · May 4, 2015

Hell yea Kush! And you guys dont joke about the price on that purple ****

Still one of the best looking rides out there :****: Looks mean as hell with the TSLs on it :driving:

kushKrawlin · May 4, 2015

Beerj said:
What's that puddle under your jeep in the pic?

Just kidding man, glad to see you got her situated.

Hahah U fuker. Had to zoom in! Hahah ****! U got me.

FlatlandFSJ said:
Hell yea Kush! And you guys dont joke about the price on that purple ****

Still one of the best looking rides out there :****: Looks mean as hell with the TSLs on it

Haha seems everything purple is good and expensive. Just can't beat the look of big ass TSL 's! Thanks Man!

kushKrawlin · May 4, 2015

Can anyone tell me why this motherfuker won't go all the way down? FAWK me. How hard can it be? Had to put stock one on after I gave up on this. I really need this to work. My stock one is not accurate .. WTf is up ??

Beerj · May 4, 2015

Is it bottoming out? If so I say cut it.

al1tonyota · May 4, 2015

How far is it going in? The o rings should be fairly tight to keep it in and from leaking. Did you try lube?

pholmann · May 4, 2015

Lubrication is the key. Remember a wet hole is a happy hole. molaugh

kushKrawlin · May 5, 2015

Man I lubed it, spit on it, even talked nice to it.. Mother Fuker. **** just don't make sense. I can get it to go all the to right before the 2nd O ring. And it is the push in type. I have tried to read about it.. Can it really be this hard. Jeeeez. I'm puttin more lube on. Watch out boys!!

kushKrawlin · May 5, 2015

I will in Mornin. The stock one uses a rubber bushing type thing that goes in the hole first, then the dip stick tube slides down in it, no O rings .. Great but tube was to long and where it bolts to motor it cracked and has a small leak.. New one doesn't use rubber thing and has 2 orings about 1/4 inch from each other. Will take pics in mornin. Passin out in 5. 4, 3,

June dog · May 5, 2015

kushKrawlin said:
I will in Mornin. The stock one uses a rubber bushing type thing that goes in the hole first, then the dip stick tube slides down in it, no O rings .. Great but tube was to long and where it bolts to motor it cracked and has a small leak.. New one doesn't use rubber thing and has 2 orings about 1/4 inch from each other. Will take pics in mornin. Passin out in 5. 4, 3,

I'm gonna bet you wanted the lokar one that bolted in? But wanted to save a buck and got the cheap one. The bolt in lokar are the

kushKrawlin · May 5, 2015

June dog. Dam you!!!! Nailed it. Ass! Ha. Fawk! But I saved 15 buks or so. :flipoff1:

kmcminn · May 5, 2015

Lokar is tits. There is a reason it cost so much.

June dog · May 5, 2015

kushKrawlin said:
June dog. Dam you!!!! Nailed it. Ass! Ha. Fawk! But I saved 15 buks or so.

15 bucks = 1 1/2 quarts of royal purple. I feel ya I own a jeep too molaugh

:smoke:

RustyC · May 5, 2015

Check and see if the bottom hex is hitting the case preventing it from fully seating. I remember having similar issues. Can't remember is I just indexed it or if I had to touch it up with a flap wheel.

pholmann · May 5, 2015

kmcminn said:
Lokar is tits. There is a reason it cost so much.

Lokar is located here in knoxville. I wonder if they sell directly to the public? They make quality **** for sure.

poolman · May 5, 2015

So kush, you got your rig fixed yet? Don't sweat it, lot of us have bought $100 plus dipsticks, sucks don't it! :****:

kushKrawlin · May 5, 2015

**** no !! I'm Runnin stock **** I reckon. Just tryin to make sure and not have to work on it the night before the ride like normal. I wanna be one of yAll that have the trailer loaded a night or 2 before goin riding. **** on being Unorganized!