• Help Support Hardline Crawlers :

What psi are you guys running your reds

Run em low, let em hook, break crap. Have fun! 25-2600 lbs 8 front, 6 rear. Works good. A few cuts when I beat on it and when I run higher air. Works good at 8 and 10 too.
 
Re:

Mortalis5509 said:
Reds really don't need single digit unless it's something stupid light. They will stay on a non beadlock wheel pretty well. In a tj I'll do 11/12 front to 12/13 rear.

same pressures here - but 5000lbs of CJ
 
I run mine at 32 psi on the highway then about 13 psi when I get to the trail then air back up to 32 psi to get home.

Reds are a horrible tire so the sooner I can wear them down to chord and run iroks, the better.


At work
 
LightBnDr said:
I run mine at 32 psi on the highway then about 13 psi when I get to the trail then air back up to 32 psi to get home.

Reds are a horrible tire so the sooner I can wear them down to chord and run iroks, the better.

zukimaster said:
Is this some kind of joke I'm not getting? I would not trade 1 wore out red for a new set of I cant's.


It is, I've been busting his ass because he runs a 42 red on a 20 and loves it.....
 
I saw jta give a "street" psi and I was appalled. I don't even like hearing mine bark as I turn 90deg in my street to load up.

Sorry though the veins in my face were about to explode while I was squeezing the life out of a scale as I read the post. I got carried away. Apologies
 
LightBnDr said:
I saw jta give a "street" psi and I was appalled. I don't even like hearing mine bark as I turn 90deg in my street to load up.

Sorry though the veins in my face were about to explode while I was squeezing the life out of a scale as I read the post. I got carried away. Apologies

Be careful doing that, because you can fracture a bone in your forearm if you bottom out the scale & keep squeezing...
 
LightBnDr said:
I saw jta give a "street" psi and I was appalled. I don't even like hearing mine bark as I turn 90deg in my street to load up.

Sorry though the veins in my face were about to explode while I was squeezing the life out of a scale as I read the post. I got carried away. Apologies
Mine are on a zuk with a 1.6L. I don't have the power to wear them out on the rocks. They are probably 7 years old and still have plenty of tread on them. A trip to the store or to grab a bite to eat isn't gonna kill them. The fact I'm in FL also means I'm not wheeling two weekends a month so they are gonna dry rot way before I wear them down.
 

Attachments

  • image.jpeg
    image.jpeg
    127.6 KB · Views: 98
Look man you can't just throw around swimsuit edition rig photos of a Zuk just to try and side step your careless treatment of red labels.

According to muddinmetal, all of the disciples ran 39" reds so they should be able to handle a trip to the store.

Then again I heard it was Haysoose himself who ran a 42" red on a twankie.

Ooooooooooohh

All in good fun gents :)
 
LightBnDr said:
Look man you can't just throw around swimsuit edition rig photos of a Zuk just to try and side step your careless treatment of red labels.

According to muddinmetal, all of the disciples ran 39" reds so they should be able to handle a trip to the store.

Then again I heard it was Haysoose himself who ran a 42" red on a twankie.

Ooooooooooohh

All in good fun gents :)
poolman said:
That's one sexy zuk!! :****: :woot: :woot:
:rolf:

We did drive it down to Rockets last time we were at Choccolocco.
 
One of minesez leaks, so I sometimes run it at 0psi.
erybody was telling me 8psi, so I was running them at 10psi and telling them. "YASSSS... they're at 8... YASSSSS"
 
I'm dropping to 5 front and 4 rear. Seemed to stiff on the buggy today :****:
 
LandSpeeder said:
One of minesez leaks, so I sometimes run it at 0psi.
erybody was telling me 8psi, so I was running them at 10psi and telling them. "YASSSS... they're at 8... YASSSSS"

You meant one on each side, right?
 

Attachments

  • CAM02517.jpg
    CAM02517.jpg
    107.4 KB · Views: 100
I'm on my second ride on Red labels. They are way stickier than I could have imagined. Axle wrap is killing the rear right now and I have to fix that. I dropped down a couple more PSI than the first test session and they still seem to be a little stiff. I am used to tires that have some wrinkle to them, but all of those were also bias ply tires. Is going down to 4 and 3 really pushing it? The buggy is super light and the winch on front could probably suspend it from a nice high tree branch. The sidewalls absolutely do not bulge or wrinkle at the current PSI. I don't want to cut sidewalls and just looking for a bunch of people to disagree and hopefully someone that just runs boggers on rockwells to chime in :stir:
 
Top