Search results for query: *

05+ Ford Dana 60 front axle. Unsure of exact year and mileage. Located in Memphis, TN $800 obo

Dana 44 diff covers off a 2016 JK Rubicon. $150 OBO. Located in Memphis, TN. Prefer not to ship but can on buyers dime.

Recently helped a friend install a Metalcloak 3.5" Gamechanger with the short arms with Rocksport shocks. Arms are adjusted to Metalcloak specs. Was on a trip to Hot Springs and on climbs the front end unloads and picks a tire. Tried to keep crawling and it just kept picking it up even higher...

I'll be starting a build this winter on a new front axle for the TJ. I've got a list of what I know I want but I'm down to trusses. First thought was Artec but TNT has one as well. The TNT has the option to adjust the coil buckets for 1.5" stretch. Artec doesn't but I was planning to modify...

I've got a TJ with the 8.8 and the e-brake has always been terrible even when properly adjusted. Last time I had the shafts out I just took off all the e-brake hardware and threw it away. That being said, I'd like to have something when on the trails. Anyone using a line lock for an e-brake?

Looking for some JK knuckles. Anyone got any collecting dust?

05+ Superduty 60 that has the brackets cleaned off and the cast on the driver side trimmed for a truss. $700 obo 14 bolt axle (smooth housing): $200 obo 14 bolt axle (finned housing): $200 obo Located in Memphis, TN. Would be interested in a JK44 front axle.

Got 2 rear axles for sale. Neither of them have brakes but still have factory brackets. Located in Memphis, TN. 14 bolt ribbed housing: $200 2007 Sterling 10.5: $200

Picked this up and decided I’m going to stick with the Sterling 10.5 rear for my build. I think it has 4.10s but the bearings are trash. Brakes have been removed. WMS-WMS is 65”. Located in Memphis, TN. $200

Looking for a 14 bolt open carrier and SRW hubs.

So I’m working on a set of tons for my Jeep TJ. I bought a pair of Superduty axles that were for sale on here. I also have a 14 bolt. I like the 8x6.5 bolt pattern compared to the 8x170 Ford pattern. Besides that, which one would be better? I’ve helped a friend build a 14 bolt so I’m fairly...

I’m in the process of building a Super Duty 60. I’m torn between the Artec brackets or having the knuckles machined for high steer arms. Opinions? Link to each: https://www.artecindustries.com/SD_Xover_HSarms_Weld_on...

Located in Memphis, TN. $14,000 obo or interested in a trade for an early model 2 door JK Rubicon. 1998 TJ 4.0L (clean ***le) 3 speed auto NP231 w/ Super Short SYE, 2low, and Savvy cable shifter HP30 with RCV and Yukon Grizzly locker 8.8 with c-clip eliminator kit and Detroit locker 4.56 gears...

For a few years now I've just been running my stock TJ gas tank behind my front seats. I'm considering changing the cage up to be able to add a Corbeau bench seat and therefore I'd need a fuel cell. What's a good option? Wanting to keep it around 15 gallons if possible, no less than 10...

TNT Customs Phantom tube fenders. Nothing wrong with them. Just wanting to go to a highline fender. $450 located in Memphis, TN. Sent from my iPhone using Tapatalk

Does anyone know the length and thread size for the bolts that hold the Detroit together for a Ford 8.8? I’ve searched online and talked to Eaton and can’t find it. Sent from my iPhone using Tapatalk

I’ve been running this kit awhile and have a leak on the passenger side. It appears to be where the seal and axle shaft make contact. I’ve tried 2 different seals and checked the shaft for any wear in that area and it’s fine. I’m not sure why this would leak. The driver side has never leaked. Is...

(4) 38x13.5R17 Falken wildpeak m/t stickies with (1) 38x13.5R17 Falken wildpeak m/t spare that is not a race tire. These were used for 1 race so they still have plenty of life in them for a crawler. Do have cuts from the rocks but all are still good and hold air. Will deliver within 100 miles of...

I'm considering getting RCVs for my HP30. I have Alloy USA ball joints and the lower ball joints sticks up quite a bit. From what I've seen, the clearance between the lower ball joint and the boot is very tight. Has anyone run this combo?

I've got a set of half doors that have been painted Sahara Moss Green. They are a little darker than the green on my Jeep as seen in the pictures. The uppers have a few little scratches on the windows but are otherwise in perfect condition. The inner door panels were grey and I painted them...