Search results for query: *

  • Users: rugger99
  • Content: Threads
  • Order by date
  1. R

    Coil Over Springs / Full Hydro filter assembly

    I have three different 2Coil sets of springs for sale. All are 2.5" (for 2" coil overs) and are 14" long. Two sets are Eibach Springs and I think the third set (blue) may be as well but not certain. (blue) 300# (silver) 175# (red) 80# $125 per set shipped. If someone wants all three sets, then...
  2. R

    New Project... 1991 FJ80

    So, like many others have done, I have decided to sell my dedicated crawler. Friends have gotten out of it, life taking a different direction, etc... are all reasons behind this decision. That being said, I still want to get out and enjoy the outdoors...hence, the new project. I picked up a 1991...
  3. R

    Well built 95 YJ for sale.

    Selling my 1995 YJ... https://www.hardlinecrawlers.com/threads/yj-build-just-a-little-different.52378/ 95 YJ with the 2.5L and RH30 (same as a 909) auto. Four link front and rear (Motobilt 4 link kit) Fox 2.0 14" Reso coilovers at both ends (tuned by Ryan @Accutune) Atlas 4.3 Diamond Axle Toyota...
  4. R

    High Angle Driveshaft for sale

    I have a High Angle driveshaft (front/Toyota) for sale. The driveshaft is in excellent shape and has only been on the Jeep for about 150 miles, all on road. the only reason I am selling is due to me stretching the front end three inches, the shaft no longer fits. I was going to have it re-tubed...
  5. R

    TMR Ram mount and hydro assist cylinder

    I have the following for sale. 1. TMR Customs Ram mount. This kit is complete as shown. TMR list price is $189. I will take $175 for it and that includes shipping. 2. Hydro Assist ram(Redneck Ram)used. 6" stroke. $90 shipped. Parts are in Tallahassee,FL.
  6. R

    Hydro Assist setup, complete

    Hydro Assist Setup : Saginaw box from a 1995 YJ (will fit up to 2003 TJ) rebuilt and tapped by Redneck Ram in 2019 also has a Genright Offroad pitman arm. New pump with modifications to meet the flow needs of the hydro assist, Reservoir, 6 inch ram and all applicable hoses. Setup has less than...
  7. R

    Winters Shifter issues after install....

    I decided to put in a console style shifter in the YJ. The trans is a 30RH, which after doing some research and talking to a couple of transmission folks, I was advised it is pretty much a newer version of a 904. After installing the Winters shifter (which is cable activated) my shift pattern...
  8. R

    Fuel pump for 95 YJ with 2.5L

    At the point where I need to order my fuel cell and a fuel pump. I would prefer to have the pump outside of the cell. Based on my research, the requirement for a 2.5L is 31 to 39 PSI for the fuel pressure. That being said, what are you guys using and /or recommend?
  9. R

    Relocating YJ computer / ECM.

    Yesterday I removed the vacuum canister and the computer (or ECM may be the correct terminology) from the driver side firewall. The canister got the heave - ho and I re-routed the wiring loom into the cab area. I am going to mount the computer high on the firewall on the passenger side inside...
  10. R

    YJ Brake system question

    I am getting ready to have new brake lines made for the Jeep. When I removed the lines, I had written down where the front and rear lines attached to the master cylinder. I cannot find my notes but I want to say the fronts attach closet to the front and the rear attaches to the rear closet to...
  11. R

    Sold/Expired Allied beadlocks for sale.

    Listing these for a friend, information below, reach out to Greg with any questions or offers. Set of four 32 bolt Allied Beadlocks, bolt pattern 5 on 4.5,. Wheels are 9", 3.75" BS, The wheels are in very good shape with minimal rock rash on the rings. $450 OBO, possible trades. Greg can be...
  12. R

    Sold/Expired Solid Toyota front axle

    Looking for one. Do not care if it has the third but definitely need it to have the spindles, locking hubs, hubs and knuckles...housing can even be bent. Let me know what you have.
  13. R

    Tilting electric fan / radiator.

    Due to space requirements, I am going to have to tilt my electric fan / radiator in order to clear the hood. It looks like tilting the radiator back (towards the firewall) about ten to twelve degrees will give me the clearance I need. That being said, does anyone foresee any issues in doing this...
  14. R

    Sold/Expired Ford factory running boards for sale

    I have a set of the Ford factory running boards. These came off of my 2017 F250 and are chrome with black plastic accents. These will also fit F150 trucks as well. These are brand new and in excellent condition. Asking $200 OBO. Located in Tallahassee Florida. Photos available on request. I can...
  15. R

    Sold/Expired Ram 2500 / 3500 tow mirrors for sale (SOLD)

    MIRRORS HAVE BEEN SOLD >I have a set of tow mirrors for sale. Asking $225 for the set. these will fit and function correctly with 2009 - 2011 Ram 2500 / 3500 trucks. They will also work on 2012 - 2017 as well but you will lose the outside temperature gauge as starting in 2012, Dodge began...
  16. R

    Best option for mounting transmission and transfer case.

    I am at the stage where i need to get the Atlas II mounted. I am entertaining three different options. 1. I can fab a mount for the transmission (30RH) using the factory mounting location and let the Atlas hang off the end. 2. I can fab a mount for the Atlas and let the transmission be...
  17. R

    Sold/Expired Coil over springs for sale

    I have the following springs for sale. Two 14" #200 springs for 2.0 coilovers - $100 for both. Two 14" #300 springs for 2.0 coilovers - $100 for both. These springs have been used for mock up only and are in excellent condition. I will also trade these for a set of Toyota Asin locking hubs...
  18. R

    Looking for back half ideas for a full body YJ

    I have two different options that I have been tossing back and forth but before I move forward, I thought I would check to see if someone has another or better option. The goal is to inboard the frame rails so I will have the clearance needed for the coilovers and also shed a couple of pounds. I...
  19. R

    Sold/Expired YJ / Toyota parts for sale - SOLD

    I have the following parts for sale: YJ hood, no dents or rust and the paint is in awesome shape (black) - $150 - SOLD YJ steering box relocation mount, moves the box forward one inch and up one inch - $75 -SOLD Toyota high steer arms Marlin with the 25mm pin installed - $150- SOLD All...
  20. R

    YJ Build...just a little different.

    I have been working on this for about a year now and haven't been on this site for quite some time. I picked up a bone stock 1995 YJ with a 2.5L and auto trans. I decided to build this as light and low as possible. Drivetrain will remain the same but the NP231 has been tossed in favor of an...

Latest posts

Back
Top