Search results for query: *

sold

New in unopened box. I sold my truck before I could install it. This will fit 2000 to 2009 Dodge Ram 3500 DRW trucks that are Hemi or Cummins powered. It will work on Dana 60 and AAM axles These go for $1600+ I'm asking 1500 obo I'm open to trades, try me. Call or text anytime for fastest...

After seeing successful trail welding with 3 batteries, 2 jumper cable sets, and 7018 rod, I decided to make my own kit. I probably have less than 100 bucks into it.

You're welcome. :awesomework: I hope to see you next Sunday.

I'm heading to pull a part in Lakewood pretty soon, meet me there. Vitas 253 411 829three

You can just upgrade the rear case's input to 23 spline and leave the front box alone. It's gonna cost like $170 for the coupler though and the cost of a 23 spline input of course. If you are running a 2.28 rear case I have a free 21 spline input for ya, pulled and ready to go.

Ah, I just always default to using 2nd gen mains since they have the shortest front halves. I just glanced at the RUF FAQ, the difference is 5/8", pretty negligible.

That set up should work but you could move your axle forward some, if desired, by running the first three leaves from the 88 due to the pin offset.

If you want to experiment with making custom leaf packs you gotta just do it. Sorry to be so vague but maybe just start by taking out the shortest leaf and seeing how she sits. Better yet, I would sell those AP springs on CL to some guy with a hard on for lift springs and start sourcing 79-95...

Awesome, good to hear. You're welcome.

I've been on the phone with him and it's running but only after some jerry rigging with a bbq vapor feed. The lock off is hard wired on and propane is present at the test port of the vaporizer but it won't run when properly hooked up leading me to believe the vaporizer is bad. Any thoughts?

http://m550.photobucket.com/albumview/albums/vitasvillamor/840.jpg.html?pbauth=1_uLEBonVPfaLdh1h3YMYz2bNcHba%2FQDYiGsFH76L2ExxnQJRSis8f1UNfElaccYDPfIWMPxbncDSZl6LLUDsZGK0XE6JQPkqIdJ7I5VwANsE6Trd7sFl1TYzUVwrgAUVamykOsuQxBDw2CQWFteX6lxuF1FiqMs1McIICaPH8Vj4%3D...

Sure thing, send them.

If you're bypassing the lock off plumb liquid propane straight into the vaporizer and just shut it off via the tank valve. Keep the carb/mixer mounted and just spray starting fluid or carb cleaner into the inlet of the mixer IF you suspect a fuel delivery issue AFTER confirming the presence of...

Call me, I will walk you through it. Vitas253 441 8293

Yes, just hard wire the lock off for now while you're sorting it out.

Running your lock off on the same circuit as your coil is probably causing a weak spark. Try running a separate/dedicated feed for your lock off solenoid. Ultimately you should run a relay for the lock off that is keyed on but for now a jumper wire will do. Check for vacuum leaks.

I have a set of Mac straps with the integrated axle loops. I loved them at first but with less than a year's worth of use they began to show wear around the buckle that adjusts the axle loop size. I tried to mitigate the problem by varying the loop size but all that did was wear out other...

I just noticed a tweco #4 for sale in the tools section of this board.

Ebay is your friend. Search for tweco #4/clones with a euro back end. I just saw a few around $200 BIN.