Search results for query: *

BeerJ did me a solid and sent me set of 14 bolt hubs he had laying around. I took a gamble, paid the shipping and they're not the correct ones. Looking to see if anyone has a 14bolt hub they'd be willing to part with......figuring the 14b front craze would free up some rear hubs :fish: The hub...

Its been a while since our group has planned a trip to Windrock....probably 3 years. We're planning to go down 6/29 weekend.... whats everyone's top 10 recommendations? I remember rattle rock, cadillac hill, schoolbus. (2) buggies on 40's, (1) on 43's and (1) on 47's. All are pretty capable and...

Trying to fix some issues I've dealt with on my buggy for a while. Are any of you running a flow restrictor in place of a thermostat? I run a dual spal fan Griffin radiator (31x19?) setup, fans run all the time and the coolant temps stay around 190-200....and get there pretty quickly. Sent...

Ive had (4) Fox 2.0 CO's with remote res on my rig for the last 2 years, and shamefully have been wheeling with factory valving in them. Id like to start experimenting with some better than shitty valving but wanted to get your opinion on the tools needed to do so. Im just a trail rider, no high...

Looking to plan a small trip with some close friends....most of us are in buggies or the like, on 42's. We frequent Harlan and Windrock. Blue Holler and Pumpjack are about the same distance from us, which would you all recommend?

Doing a little research for my brother....Anyone know what it takes to adapt a ford 6.0 ZF6 to a dodge 29 spline np205? Working on a 4wd conversion on an 89 12 valve dodge (previously a Getrag truck). Thanks for the help.

Located in Cincinnati, OH. Looking for a kingpin Ford 60 housing. Thanks. 513-600-8144

I am looking at adding a few new tools to my shop over the next couple years; one tool I thought that could be quite useful for all my steel projects would be a vertical mill. I have no personal experience with a mill, but I think it would have made a lot of other projects a lot easier. This...

Running a 241/205 doubler (behemoth sucks). It works well, other than it leaks at the mating surface between the two boxes. Anyway, the 241 holds about a 1/2 quart of ATF and seems to heat up more than I would expect...enough to where you cant touch it for more than a few seconds. My exhaust...

Ive been working as a Project Manager for an Industrial Real Estate Developer/Landlord in the Midwest for the last two years. Over the last two years the bulk of my responsibilities have been in the Ohio, Kentucky and Indiana areas. Two weeks ago I was asked to be the primary manager for Tenant...

I am selling my 1980 Chevrolet 6.2l diesel C10 with 60,000 miles. This has a fresh th400 transmission that shifts firm. This truck has a semi float disc brake 14 bolt swapped into the rear with posi traction and 3.73 gears. The truck has all new brake lines, brakes, wheel bearings, calipers and...

I bought a 260k mile 1998 Dodge Cummins 2wd with an nv4500 as a tow pig back in December. I knew when purchasing the truck that it did not have an easy prior life (stack, South Bend DD clutch), but like most of my purchases (similar to Kels Texas motorhome trip)....I try to buy things when...

Long time listener, first time caller. Been a Hardline regular for several years now, but haven't posted much on my build till now. I have always been a lover of trail riding, doesnt matter what the vehicle is.....buggy, truck, quad, tractor or bobcat. Bear with me now....first time builder...

Working on wrapping up my buggy project with a salvaged orbitol from a forklift.....i think (received this second hand from a HL member). I am trying to figure out the thread size for the (4) main ports in order to adapt to 6 an. I have done some Googling and haven't come up with any info...

I've built a few sets of driveshafts for buddies and myself, usually using Spicer parts machined (Carolina Driveline or Northern) to accept 2.5" x .25" wall DOM. In the past, i built the shafts on the truck rotating the driveshaft and tapping till within a certain spec....usually .01". Mocked up...

Hamilton, Oh 45013. Diff cover for a 98 dodge d80.

Is there a PS pump relocation bracket for v6 4.3 vortecs similar to the v8 4.8/5.3 and 6.0's? Drew @ Goat Built didnt have knowledge of one... Looking to eliminate the factory cast AC compressor/power steering pump bracket and move the PS pump higher.

In the Cincinnati, OH area. In the market for some 17" beadlocks.....figured id poke around and see if there are any used or sitting on someones shelf. I am open to all (steel and aluminum).

Yokes for Dana 60, 14 bolt and 205 (front and back).

Looking for a 32 spline front output for an np205. Thanks, Ben