tonybolton
Bypass Crawler
Since I mostly run bypasses.....I've not needed a skid plate for much, but now that I've clearanced my oil pan a lil bit...again, I'd like to add one.
If anyone has some pictures of how they did theirs, I'd appreciate it. Preferably only those that have high triangulation of the upper link bars. Mine go from inside of frame rail to about 3" apart on the axle.
I'm basically gonna come off the trans cross member but it's gonna get tight up towards the oil pan when trying to keep clearance loss to a minimum and easy removal still an option.
If anyone has some pictures of how they did theirs, I'd appreciate it. Preferably only those that have high triangulation of the upper link bars. Mine go from inside of frame rail to about 3" apart on the axle.
I'm basically gonna come off the trans cross member but it's gonna get tight up towards the oil pan when trying to keep clearance loss to a minimum and easy removal still an option.