3DB Crawler build by Cutlerfab

mcutler · Apr 19, 2018

Re: Re: 3DB Crawler build by Cutlerfab

poolman said:
Impressive! drool

5BrothersFabrication said:
X 10000!!! drool drool drool

Thanks guys!

Sent from my SM-G925R4 using Tapatalk

ToyotaTom · Apr 19, 2018

Weird question, what size tungsten and filler rod are you using?

mcutler · Apr 20, 2018

Re: Re: 3DB Crawler build by Cutlerfab

ToyotaTom said:
Weird question, what size tungsten and filler rod are you using?

Not weird.

3/32, 2% lanthanated

Couple different fillers, depending on position and thickness; .035, .045, 1/16 er70s-2

Sent from my SM-G925R4 using Tapatalk

CHASMAN9 · Apr 20, 2018

Re: Re: 3DB Crawler build by Cutlerfab

mcutler said:
Not weird.

3/32, 2% lanthanated

Couple different fillers, depending on position and thickness; .035, .045, 1/16 er70s-2

Sent from my SM-G925R4 using Tapatalk

220, 221, whatever it takes. :rolf:

VERY IMPRESSED AS USUAL WITH YOUR WORK. :dblthumb:

ADMINISTRATOR

ToyotaTom · Apr 20, 2018

Re: Re: 3DB Crawler build by Cutlerfab

mcutler said:
Not weird.

3/32, 2% lanthanated

Couple different fillers, depending on position and thickness; .035, .045, 1/16 er70s-2

Sent from my SM-G925R4 using Tapatalk

Thanks, I just started TIG welding this week. Trying to get to CutlerFab status.

mcutler · Apr 24, 2018

Re: Re: Re: 3DB Crawler build by Cutlerfab

CHASMAN9 said:
220, 221, whatever it takes. :rolf:

VERY IMPRESSED AS USUAL WITH YOUR WORK. :dblthumb:

ADMINISTRATOR

thank you!

ToyotaTom said:
Thanks, I just started TIG welding this week. Trying to get to CutlerFab status.

looking good

Sent from my SM-G925R4 using Tapatalk

mcutler · Apr 24, 2018

Cage has been removed, fully welded , and made its way back home. Ready for the last tie on to the engine cage/ front half.

Matt

Sent from my SM-G925R4 using Tapatalk

The Luke · Apr 25, 2018

Excellent work as always. But, are you not concerned about your buddy shwacking his noggin on that x-bar behind the seat? I feel like it's perfectly placed for concussions and the like. Or maybe it's just the camera angle?

mcutler · Apr 25, 2018

Re: Re: 3DB Crawler build by Cutlerfab

The Luke said:
Excellent work as always. But, are you not concerned about your buddy shwacking his noggin on that x-bar behind the seat? I feel like it's perfectly placed for concussions and the like. Or maybe it's just the camera angle?

Thanks Luke!

Not in the least, especially when properly strapped in. I'm 6'4, and David is at least 6" shorter than me, and I wouldn't be concerned about my own head with these tall PRP seats, and certainly not his being lower.

And with a very similar design, (jhf/Goatbuilt chassis and PRP seat), I would be more concerned on this chassis with hitting the b- pillar. But again properly strapped in, not an issue. We should all be strapped at anytime... although I'm as guilty a anyone for not always following suit.

Matt

Sent from my SM-G925R4 using Tapatalk

The Luke · Apr 25, 2018

I gotcha. Now that I know they are tall prp’s, It makes way more sense. I need a set of those.

Keep up the good work. Carry on.

jeeptj99 · Apr 26, 2018

This thing is sexy.

pennsylvaniaboy · Apr 26, 2018

The Luke said:
I gotcha. Now that I know they are tall prp’s, It makes way more sense. I need a set of those.

Keep up the good work. Carry on.

if they were corbeau's you would be screwed....

Dirt700 · Apr 26, 2018

Turning out damn nice!

mcutler · Apr 27, 2018

Re: Re: 3DB Crawler build by Cutlerfab

jeeptj99 said:
This thing is sexy.

pennsylvaniaboy said:
if they were corbeau's you would be screwed....

no doubt, they're baby seats compared to these

Dirt700 said:
Turning out damn nice!

thanks guy!

Sent from my Samsung Chromebook Pro using Tapatalk

mcutler · Apr 30, 2018

Not much shop time of late.

So I knocked out a small task, with the front bumper.

Working on finishing the tube work on the front half.

And a little brainstorming on console area.

Matt

Sent from my SM-G925R4 using Tapatalk

5BrothersFabrication · Apr 30, 2018

I can't believe you keep getting me to check on JEEP build threads daily. That's the equivalent of a couple dudes showing up to the house on 10 speeds and 2 minutes later I'm a Jehovah's Witness. I hated Jeeps before you started building them.

Mind if I ask where a feller gets a fancy switch and fuse panel like that? I bought a used one once, sold it in minutes, and wish I had kept it.

hokie_yj · May 1, 2018

I’m pretty sure that’s a 12VoltGuy panel. Looks just like the one I used in mine except a different style start button. They’re very nice panels.

onepieceatatime · May 1, 2018

Re: Re: 3DB Crawler build by Cutlerfab

hokie_yj said:
I€™m pretty sure that€™s a 12VoltGuy panel. Looks just like the one I used in mine except a different style start button. They€™re very nice panels.

X2

Sent from my SM-G930T using Tapatalk

5BrothersFabrication · Jul 16, 2018

Well? :dunno:

Forbanger · Jul 16, 2018

What radiator are you going to use? Off the shelf, or custom? Needing ideas for up travel reasons on mine.

mcutler · Jul 17, 2018

Re: Re: 3DB Crawler build by Cutlerfab

5BrothersFabrication said:
Well? :dunno:

Nothing yet. Busy with some light remodeling in the house for a refinance. Back in the shop next week.

Forbanger said:
What radiator are you going to use? Off the shelf, or custom? Needing ideas for up travel reasons on mine.

Customer supplied radiator and fan combo. Not a high dollar unit I don't think, 27x19 I believe.

Sent from my SM-G925R4 using Tapatalk

crawler nut · Jul 28, 2018

Smokin sweet work as always. Can't wait to wheel with you guys again.

stano · Jul 30, 2018

Nice work as usual. I been stalking, but tapacrap wouldn’t let me log in, but I’m back now......carry on ........

Sent from my iPhone using Tapatalk

mcutler · Nov 26, 2018

Filling some empty spaces in the cage...

Cutlerfab

Sent from my SM-G892A using Tapatalk

5BrothersFabrication · Nov 26, 2018

Dooooooood, that's so badass. Your tig welding looks like it's getting better every time. #weldporn

mcutler · Nov 26, 2018

Re: Re: 3DB Crawler build by Cutlerfab

5BrothersFabrication said:
Dooooooood, that's so badass. Your tig welding looks like it's getting better every time. #weldporn

#weldeverydamnday ????

Thanks brother

Sent from my SM-G892A using Tapatalk

showtime33 · Nov 26, 2018

Doors are killer!! You sir are a welder, I'm more of a grinder ;D

CHASMAN9 · Nov 27, 2018

Re: Re: 3DB Crawler build by Cutlerfab

mcutler said:
#weldeverydamnday ????

Thanks brother

Sent from my SM-G892A using Tapatalk

I believe that I could leave a bag full of cash with you and come back to a finished buggy and never ask a single question BEFORE, DURING, OR AFTERWARDS. Amazing skills sir.

ADMINISTRATOR

mcutler · Nov 27, 2018

Re: Re: Re: 3DB Crawler build by Cutlerfab

showtime33 said:
Doors are killer!! You sir are a welder, I'm more of a grinder ;D

Thank you!

CHASMAN9 said:
I believe that I could leave a bag full of cash with you and come back to a finished buggy and never ask a single question BEFORE, DURING, OR AFTERWARDS. Amazing skills sir.

ADMINISTRATOR

I'll have an empty bay around summer time....

Sent from my SM-G892A using Tapatalk