SOLD
4 seat roller tube chassis with Jeep skin. My time, money and motivation have left the building. I would love to see someone finish this.
Asking $15,500, Includes 16' flat bumper pull trailer.
2006 LQ4 6 liter, 82K miles, engine, harness and tune all from Meridith Machine (Joplin MO), two speed fan output, MAST oil pan, Any Seven Off-Road oiling tray, Goat Built PS relocate with PSC pump and Sanderson headers, swapped to DBC.
TH350, Rebuilt by Dwight Woodlee, ATLAS 2 speed, 3.8 ratio, short tail, passenger drop, 1350 yokes, standard shifters. Two piece front shaft with WOD carrier bearing.
60 front, ARB air locker, DYNA-TRAC 5 on 5.5 hubs/with ¾ ton brake setup, kingpins rebuilt every bearing and seal is new, Longfield spindle bushings
14 bolt rear, 5 on 5.5, ARB locker, every bearing and seal is new. 4.88 gears
Sway-A-Way race runner 2.0, 14 inch with remote reservoirs, springs have not been selected but are included, you get to pick your rates on brand new springs. QA1 rod ends
Twisted Stich Pro seats and Pro Jr rears, one has additional set of shoulder slots for shorter child
PSC pump, PSC 2.5" x 8" DE ram, Eaton 7.3 ci load reaction valve, PSC aluminum res with -8 returns and -10 feed. Should be a touch under 3.5 turns L-L, ¾ rod ends, left and right hand thread 7075 tie rods.
Four 39" Red label Krawlers, brand new never mounted. 17x 9 Allied bead locks. Four 37" Blue label Krawlers, ~70% tread. Griffin radiator, volvo two speed fan, power brakes,
Ton of small items go with this that I can't think of right now. Fuel and brakes plumbed. Includes sheet and a half of 0.080" 5052 aluminum sheet. 5 x 10', extra tubing, , wiring harness, call or text for more info.
Cookeville, TN 38506
Asking $15,500 or trade on RZR, zero turn mower, road worthy Jeep…
931 260-5337
Scott
4 seat roller tube chassis with Jeep skin. My time, money and motivation have left the building. I would love to see someone finish this.
Asking $15,500, Includes 16' flat bumper pull trailer.
2006 LQ4 6 liter, 82K miles, engine, harness and tune all from Meridith Machine (Joplin MO), two speed fan output, MAST oil pan, Any Seven Off-Road oiling tray, Goat Built PS relocate with PSC pump and Sanderson headers, swapped to DBC.
TH350, Rebuilt by Dwight Woodlee, ATLAS 2 speed, 3.8 ratio, short tail, passenger drop, 1350 yokes, standard shifters. Two piece front shaft with WOD carrier bearing.
60 front, ARB air locker, DYNA-TRAC 5 on 5.5 hubs/with ¾ ton brake setup, kingpins rebuilt every bearing and seal is new, Longfield spindle bushings
14 bolt rear, 5 on 5.5, ARB locker, every bearing and seal is new. 4.88 gears
Sway-A-Way race runner 2.0, 14 inch with remote reservoirs, springs have not been selected but are included, you get to pick your rates on brand new springs. QA1 rod ends
Twisted Stich Pro seats and Pro Jr rears, one has additional set of shoulder slots for shorter child
PSC pump, PSC 2.5" x 8" DE ram, Eaton 7.3 ci load reaction valve, PSC aluminum res with -8 returns and -10 feed. Should be a touch under 3.5 turns L-L, ¾ rod ends, left and right hand thread 7075 tie rods.
Four 39" Red label Krawlers, brand new never mounted. 17x 9 Allied bead locks. Four 37" Blue label Krawlers, ~70% tread. Griffin radiator, volvo two speed fan, power brakes,
Ton of small items go with this that I can't think of right now. Fuel and brakes plumbed. Includes sheet and a half of 0.080" 5052 aluminum sheet. 5 x 10', extra tubing, , wiring harness, call or text for more info.
Cookeville, TN 38506
Asking $15,500 or trade on RZR, zero turn mower, road worthy Jeep…
931 260-5337
Scott