Addison66
Well-Known Member
SOLD
Going to sell the 4 seater.
Here's what I have.
Ok so I am going to part it out. Here's a run down.
Chassis is what you see. 1.75 DOM tube. It has the 4 link brackets front and rear and shock mounts on it. Chassis is fully welded. $2900
I have the Grill and hood from a CJ that fits this Chassis also
8 links with new hiems.
Sold
Box for rocks is 2.72 to 1 low and 1 to 1 high.it hooks to a stock Dana 300 transfer case. I cut the shifter off the 300 because I was going to put cable shifters on the buggy. Also comes with used Novak adapter. 4L60E to Dana 300
Sold
I have a set of tires. 2 19/44/16.5 Boggers and 2 18.5/44/16.35 TSL's. Almost new tread. 4 Trailworthy Fab double beadlocks with rock rings. 8 lug 3.5 backspacing
$old
Selling as a pair
Dana 60 front King pin style, Passenger drop complete, 4.10 gears welded. High steer arms set up for 4 link.
Dana 70 rear complete. rear drums brake have been taken off and I haven't put anything back on. 4.10 gears welded set up for 4 link. The axles need gone through. I know the back has 2 bad bearings but I haven't looked in the front.
Sold
4 fox 16" coilovers . Coilovers are used.
Sold
PSC 2.5 x 8 steering ram and Orbital to go with it. Both New in the box.
Sold
Going to sell the 4 seater.
Here's what I have.
Ok so I am going to part it out. Here's a run down.
Chassis is what you see. 1.75 DOM tube. It has the 4 link brackets front and rear and shock mounts on it. Chassis is fully welded. $2900
I have the Grill and hood from a CJ that fits this Chassis also
8 links with new hiems.
Sold
Box for rocks is 2.72 to 1 low and 1 to 1 high.it hooks to a stock Dana 300 transfer case. I cut the shifter off the 300 because I was going to put cable shifters on the buggy. Also comes with used Novak adapter. 4L60E to Dana 300
Sold
I have a set of tires. 2 19/44/16.5 Boggers and 2 18.5/44/16.35 TSL's. Almost new tread. 4 Trailworthy Fab double beadlocks with rock rings. 8 lug 3.5 backspacing
$old
Selling as a pair
Dana 60 front King pin style, Passenger drop complete, 4.10 gears welded. High steer arms set up for 4 link.
Dana 70 rear complete. rear drums brake have been taken off and I haven't put anything back on. 4.10 gears welded set up for 4 link. The axles need gone through. I know the back has 2 bad bearings but I haven't looked in the front.
Sold
4 fox 16" coilovers . Coilovers are used.
Sold
PSC 2.5 x 8 steering ram and Orbital to go with it. Both New in the box.
Sold