60 question?

[Toyota_corey]

Have a 91 front king pin 60 that i was going to use for a build but arnt now...
what my Q is .. i have a 99 F-350 but the front axle isnt a true 60 its like fords 50 or something dont know...cause aint worth even learning about....but i would like to put the the 60 in the F-350 so its realiable cause its got 41's on it....but my dilema is the spindle pattern differnce because of the year differnce's between 91 and 99.... is there and spindle that i could put on that older axle that matches the newer patterns so i wouldnt have two differnt patterns on the truck cause thats retarded...means i couldnt use the wheels i already have:redneck:

 

[GearHead1]

The 99 does have the metric wheel pattern. I havent seen or herd of any one making a hub to go to metric (just the other way around). The only thing that I know would wheel adapters from like a dapt it usa wheel adapters. Maybe someone else might know of something else. Good luck

 

[TreeClimber]

You should be able to take the wheel hub to a competent machinist and get the hubs redrilled to the correct pattern.

 

[dobber]

waste of time... leave it where it was originaly going in finish it

or

so im not ruining for 8x170 to 8x6.5 adapters go here...

http://adaptitusa.com/8x170to8x650wheeladapter.aspx

same place my ranger to toyota ones came from