• Help Support Hardline Crawlers :

86 efi 4runner no spark

Redwoodinnovations

Well-Known Member
Joined
Feb 3, 2012
Messages
46
So the truck has brand new coil igniter cap plug wiresit will run for 3 min then dies and has no spark once it cools down it will start again any ideas?
 
It's not even mine lol it is super clean though. He has put 1500 bucks into it in the last month between parts and someone else working on it I felt bad and brought it to my place I am going to try a distributor tomorrow and try to hunt down an ecu to try. After that I am out of ideas
 
Only 2 things that will cause no spark with a new igniter. The pole piece in the dist (also loose injection pulse) or loss of voltage/ground to the igniter.
 
Only 2 things that will cause no spark with a new igniter. The pole piece in the dist (also loose injection pulse) or loss of voltage/ground to the igniter.

Or a bad new ignitor---that NEVER happens! :haha: But yeah, if you have no injector pulse either, I'd look at the dist...
One other thing to look at is the EFI main relay, has it gotten wet??? They're known for failing due to water intrusion...
 

Latest posts

Top