angryfab one seater aka (problem child)

[jordan7118]

Re: angryfab one seater



Hangovers suck. I usually just moan and writhe in pain in bed until late afternoon :-X

 

[plumberbeck]

Re: angryfab one seater

Got up this morning with a hangover . An thought what can I do that is easy so I tacked up the other header for thr one seater . I will tig it up an grind it when I feel better

cant wait to see u in the woods with this thing but for all the fab ur havin to do on it "problem child" is the perfect name but I no if anybody can get it together ur the man...keep at it George its lookin good

 

[Fire Freak]

I am ready to see this thing beat like a rented mule! :****:

 

[kennyWayne]

I got to sit in this unit sat..its very comfortsble..an one awsome lookin unit.cant wait to see george gassss on it

 

[angryfab]

Damn found my build thread on page 4 . Well here is what I did on the shifters . An got a whole bunch of little bitty **** done that nobody cares about

 

[Eddyj]

I care

 

[Rokcrler]

Looks like you push the shifters out and in? How easy are they to shift?

 

[workinman789]

Hmm I like those shifter handles lol!!

 

[angryfab]

Looks like you push the shifters out and in? How easy are they to shift?

if you mean how easy it is to move them its really easy . This way siting in the seat all I got to do is move my hand down an shift . An nothing is in the way in front of me

 

[Beerj]

Looks like you push the shifters out and in? How easy are they to shift?

Looks to me like they move left and right.

 

[Rokcrler]

Re:

That's what I meant. Pretty clean setup

 

[angryfab]

Ok got the fuel cell done it came out to 13 gallons before I put the bottom sump on

 

[angryfab]

Also built the battery box an mounted some switches an push start on the shifter

 

[angryfab]

Ok so one seater that means drive shaft wright under seat comes apart me got problems.
So I built a new drive shaft out of 3/16 tube an put the slip at the axle end an built a drive shaft hoop an then plated from my seat crossmember to the hoop with some 1/4 in Ar 500 impact plate .that should take care of it
If anybody has a better way let me know

 

[Chuck19]

I would make sure you cover all your seating area I had a teacher in high school that was a NHRA driver before going into teaching that had a drive line come apart under him and let's just say you don't want that happening to you he just about died from it and still walks with a limp and has problems from it!
I would say cover joints and all just in case.
Oh by the way this thing looks awesome!

 

[angryfab]

Tks bud! I will that's kinda what I was thincking I will post up what I come up with . I do need the rest to be able to un bolt because of being able to get the t case out with out to much anger

 

[angryfab]

Ok I got something in mind .shouldn't be a problem maby I can get it done today an I will post some pictures .
It is mount radiator day for the other 3 buggys in the shop .YA!

 

[angryfab]

Ok I thinck this will work the cross member that the front side is welded to comes out .also got started on a floor an got some water plumbing done

 

[angryfab]

I also got a radiator mounted an the motor guard built on a chassis I built last week

 

[poolman]

Looks great man! You can just swap all my parts over to that for the price we talked about!