Skid Mark
Well-Known Member
Does anyone know where a good deal is on having a stock front drive line extended slip yoke made and have it balenced
Its on a 95 chevy I installed a SAS D44. I have both the stock ifs drive line and the 79 F250 stock DL that goes to the Highpinion D44. I wanted to see about useing the ends that go to there equipment and have them mated together with an extended slip yoke.
Thanks
Its on a 95 chevy I installed a SAS D44. I have both the stock ifs drive line and the 79 F250 stock DL that goes to the Highpinion D44. I wanted to see about useing the ends that go to there equipment and have them mated together with an extended slip yoke.
Thanks