• Help Support Hardline Crawlers :

Bluetorch Buggy Rebuild

Almost Done it's the little things that take the longest.

Polished Roof Panels
DSCN00142.jpg

DSCN00122.jpg

Got the hood and cowl back from the painter.
DSCN00132.jpg
 
I cut new Lexan floor windows and also added a dead pedal on the drivers side I used a billet freestyle bicycle peg for the dead pedal.
DSCN0015-1.jpg

I put together a new intake set-up to help it breath a little better.
DSCN0020-1.jpg

Dome light
DSCN0041.jpg

DSCN0031.jpg

My Stak transfer case has jumped out of gear since it was new and Stak offered no help. I bought a New improved shaft from Trail Worth Fab and installed it in the Stak. Problem solved it doesn't jump out of gear anymore.
IMG_0998.jpg

IMG_1001.jpg

Added a CB and installed it into the center console. I used an external speaker under the console and mounted the mic on the outside of the console.
IMG_1119.jpg

Cb antenna the stripper chick has been along for the ride since I built the buggy she's my good luck charm.
DSCN00181.jpg

I bought some monkeys in Mexico last year so I drilled and tapped them for shift knobs. Hear no Evil, Speak no Evil, and See no Evil
DSCN0037-1.jpg

I finished it up over the Week-end
DSCN0070.jpg

DSCN0078.jpg

DSCN0072.jpg

DSCN0074.jpg

DSCN0067.jpg

DSCN0068.jpg

DSCN0065.jpg

DSCN0064.jpg

DSCN0056.jpg

DSCN0053.jpg
 
Top