Bolt on Stickers

[JNK-RNR]

those pics were shot with auto focus.... just stare at them longer and they will focus for ya :fawkdancesmiley:

Maybe if I drink some more that will help. :beer:

 

[2pwrlftrs4u]

fawk this **** is going slow

 

[skinny_pedal]

those pics were shot with auto focus.... just stare at them longer and they will focus for ya :fawkdancesmiley:

:haha: Will it do wheelies?

 

[2pwrlftrs4u]

:haha: Will it do wheelies?

do you love cawk :fawkdancesmiley:






wiring done and water proofed as best as I can get it.

turn signals re-wired/restored

snatched up a 1952 M100 trailer for a few bucks, had to have it. It will go to this jeep as a camping/overland exp trailer.... more to come.

 

[Jaydog]

How do you like the Victory? I've looked at them but never rode one, couldn't make the leap from the HD.

 

[2pwrlftrs4u]

How do you like the Victory? I've looked at them but never rode one, couldn't make the leap from the HD.

go ride one then tell me ... love the Hammer, torque monster. the 6sp is also great to have.

 

[2pwrlftrs4u]

more wiring and sheet metal work

 

[2pwrlftrs4u]

headlight rings came in, hood is coming along, hood pins installed, its almost ready to pull and start the body work

 

[2pwrlftrs4u]

a lot of horsepower recently added, mo stick'uhs

thanks again to Craig @ Ridgeline :awesomework:

 

[JNK-RNR]

a lot of horsepower recently added, mo stick'uhs

thanks again to Craig @ Ridgeline :awesomework:

Looking pretty good, have you done your T-case yet?

 

[2pwrlftrs4u]

Looking pretty good, have you done your T-case yet?

thanks bro,

tcase is next on the list, well the cross members. I have everything ready, just gotta get some polly bushings and see if I am going to be able to clock it flat without cutting too much out of the floor.

 

[JNK-RNR]

4 months no updates... I know you are doin **** to this!

 

[03 CON]

No, he is looking for adhesive remover in a can so he can take off all the stickers...:haha:

 

[2pwrlftrs4u]

4 months no updates... I know you are doin **** to this!

I know huh... I added a few stick'uhs... I will get the pics up soon

No, he is looking for adhesive remover in a can so he can take off all the stickers...:haha:

oh hells no :fawkdancesmiley:

stick'uhs on this POS are bolted on :redneck:

 

[2pwrlftrs4u]

Warn Hubs installed for the drive down from AK, drive flanges shelved for now




Puppy with a big head




back under the knife

 

[2pwrlftrs4u]

Rebuild kit for the 8.8 E-brake



8.8 ready to go under.... 5.13's/Detroit/Spydertrax Adapters






Back on all 4's

 

[2pwrlftrs4u]

Bye Bye TJ tail gate




the help.... asleep




Snagged this for a few bucks... prolly gonna order the Swag Offroad hinges ect...

 

[2pwrlftrs4u]

some of the work on the 8.8 ...shaved some stuff... plugged some stuff... glued some stuff.

 

[2pwrlftrs4u]

I have the rear antirock sway bar on the way... hope those foos send mo stick'uhs, gotta decide what I am gonnna do with shock mounts, and finish brake lines and the rear is done. :flipoff:


here's a puppy who loves pork rinds

 

[Jacob]

I just finished a CJ tailgate swap on my TJ.

I made a 3/16" strap all the way across the flat spot on top of the tailgate to get toyota pickup latches to set out flush with my corner guards. I threaded the inner hole for the latch and used a cut off bolt into the strap. The outer hole is drilled through the strap and through the tailgate lip with a nut on back. Make a couple of ears for the latches to hook onto and it works pretty good. I just made 1/8" backing plates with nuts tacked onto them for the stock CJ hinges. I was able to fish those up into the factory cut out body holes under there.

FWIW if you decide to look into this I was able to find the latches on some low rider parts website for $1.16 each. So buying new is way cheaper than looking for used ones.