• Help Support Hardline Crawlers :

Car Lift - Asymmetric vs Symmetric

98TJ

Well-Known Member
Joined
Jan 5, 2012
Messages
534
https://www.bendpak.com/car-lifts/two-post-lifts/xpr-10as/

https://www.bendpak.com/car-lifts/two-post-lifts/xpr-10s/

I don't know **** about lifts, but I am in the planning stages of adding a lift to our garage at home. I mainly will be lifting TJ/JK's and average sized passenger cars, like a Camry. I will also occasionally be lifting an F350 DRW Powerstroke Crewcab. I thought I wanted an asymmetric lift to allow opening the vehicle doors, but others have told me I would be better off with the symmetrical version. I'm a big guy and squeezing through a slightly cracked door ain't an option. The two Bendpack lifts above can be installed in a narrow or wide configuration; I would install it in the wide configuration. Any thoughts or suggestions?
 
Dont know **** myself but looking at the specs they are basically the same across the board with the exception of the rotated main supports. That rotation slightly changes the reach of the arms but otherwise they retain the same dimensions. I think you go with the asymetrical to gain the ability to open the doors.
 
I prefer the wider symmetric lifts for heavier vehicles. I have a 12k Atlas in my home shop and it is a little more trouble for shorter wheelbase cars since the arms are larger. We have a asymmetric Rotary SPOA10 at work and it is the best designed lift that I have ever used: https://rotarylift.com/product/spoa10/. The three stage arms are great. We got it from Quality Equipment in Murfreesboro TN: https://www.autolift.org/inspector/quality-equipment-service/. Owners name is Miles Mingle and they were great to deal with. We had a Manitowoc 9k asymmetric that was built like a tank but the rear arm pivots became worn from 20 years of use so we had to replace it.
 
Last edited:
I gave 500 bucks for this gently used 9k unit
 

Attachments

  • B21A44F4-1D73-4018-866B-BE9E33CC6241.jpeg
    B21A44F4-1D73-4018-866B-BE9E33CC6241.jpeg
    1.4 MB · Views: 209
With that big Ford you want the symmetric lift. I have a 10k and 12k rotary symmetric in my shop, both are fantastic lifts, just bought 3 more 9k asymmetric rotarys. Big Ford trucks are a pain in the ass to rack up properly because the rear part of the frame are much higher than the front. The 10 and 12 k lifts have the adapters to pick it up without it being sketchy. My Mac guy has a 12k atlas at his home, picks up his cc dually no problem and for a home lift it's a great lift.
 
With that big Ford you want the symmetric lift.

My buddy has a 10K symmetric lift and that is the same thing he says. I just don't want to get the wrong lift. 95% of its use would be with short wheelbase jeeps or small passenger cars. I would probably only use it for the big truck for tire rotation, oil changes and fuel filter changes. Thanks for the responses.
 
I have three challenger what they call a versametric lift 10k, will never buy anything else they pick anything up I want from a lowered car to a crew cab flat bed. I also have a challenger 12k for the 550 trucks.
 
I have three challenger what they call a versametric lift 10k, will never buy anything else they pick anything up I want from a lowered car to a crew cab flat bed. I also have a challenger 12k for the 550 trucks.

Yep, I have a different brand but same concept. It's the way to go.

 

Latest posts

Top